Guest bigoldv8 Posted February 5, 2012 Share Posted February 5, 2012 Hi Folks - Hopefully an easy question - can anybody tell me what the clamp on the trans dipstick on a 63 / 401 / dynaflow is supposed to attach to? I see nothing within reach of that clamp. The dipstick is tight as-is but I'd like to figure out what I'm missing here. I did not find any reference for this in the shop manual. Going over the car again and found this today.Thanks as always! Link to comment Share on other sites More sharing options...
Lapham3 Posted February 6, 2012 Share Posted February 6, 2012 There's a drilled/tapped boss on the exhaust manifold that it bolts to-good luck Dan Mpls. Mn. Link to comment Share on other sites More sharing options...
Guest bigoldv8 Posted February 6, 2012 Share Posted February 6, 2012 Perfect, Thanks! I found it. The old bolt is of course broken off in it, so that's why I couldn't find a hole for it! Time to get out the right angle drill. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now