Scotts_DG8 Posted May 18, 2010 Share Posted May 18, 2010 I'm attaching pictures of the cam bearings that had been recently installed in a 318 that I am rebuilding. Does anyone here see anything wrong with these? Any and all feedback is appreicated. Thanks, Scott... Link to comment Share on other sites More sharing options...
Guest LCI Posted May 27, 2010 Share Posted May 27, 2010 They look good as long as the holes that feed the heads are clear. DanPS: Your stuff went out today. Link to comment Share on other sites More sharing options...
Scotts_DG8 Posted May 28, 2010 Author Share Posted May 28, 2010 They look good as long as the holes that feed the heads are clear. DanPS: Your stuff went out today.Thanks for your thoughts on my question and the update. I've talked with the machine shop and will be taking the block back in to them and they will change them out and replace/realign them. My question/concern was based on the fact that when I pulled the engine down all the cam bearing oil holes aligned and now they are not. Scott... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now