Jump to content

MonsterTruck

Members
  • Posts

    20
  • Joined

  • Last visited

    Never

Posts posted by MonsterTruck

  1. Problem is I dont have any money to get a tech involved. I cant seem to find a break in the wire it goes into the main loom then comes out on the driver side next to the battery and ecm. Ive replaced the coil twice so I dont think thats it.

    Do I just need to yank the distributor to check the gear?

  2. HEP seems to be all in intact. I found where the postive wire for the coil ends and I believe its at the ecm next to the battery? I put a multimeter on that and when the motor is cranking it makes about .30 volts intermitenly so its like it trying but not makeing the voltage it needs. Do you think the ecm is bad?

  3. Hi ive got a 89 tc with the 4cyl and automatic in it. I was going down the highway and decided to wind it up and she just cut out and died. before it was cutting out intermitenly at wide open throttle runs.

    I come to find looks like there is no spark. Ive replaced the coil rotor and even the sensor under the Cap still seems to be no spark. I checked the coil for voltage and there is no voltage at the supply wires. When the wires are disconnected from the coil there is about 10-11 volts.

    Im at a complete loss on this it cranks over just find there is fuel pressure in the rail it just wont light off.

×
×
  • Create New...