-
Posts
354 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by DE SOTO
-
-
I have 3 that are 2"
However, your .08 measurement is very short.
1 if mine is 1 3/4 & other 2 are 2".
Sorry, I tried 🤷♂️
- 1
-
How long from the flat to the end of the threads ?
-
I accuired this Dodge chassis awhile back, posted parts for sale twice & no takers.
So here it is ... One last Time before its shipped to China, Melted down & turned in to Tuna cans.
1929 Victory 6
Parts to be sold :::
6 cyl core engine & trans
$200 for the pair
front & rear axle for Wood wheels .. $100 each
front & rear leaf springs
$50 ea spring
Front Fenders, pretty straight & solid but running board end was trimmed of ... No breaks in the beads.
$50 ea
Frame, has some deep pitting that would need to be repaired. Would make an Awsome Speedster frame.
$300
Located in Ventura California
Parts MUST be picked up & in a timely manner.
No time to ship or talk of your not really Interested.
what you see is what I have,I do not know internal condition.
can help load if you send a truck.
other questions,
call Rick 805-746-9011
- 1
-
I bought this for the wheels, front & rear axles for another project.
Frame, axles for wood wheels, engine, trans, steering column, radiator, grill shell, headlight bar & headlights (incomplete) are available.
Will mostly be Cheap, heavy parts you can make an offer & are pick up in Ventura California.....
Grill shell is $500
Radiator is $200
Message me with questions or call Rick 805-746-9011
-
Saw this on Face Book Market Place.
Located in Nevada
-
For Sure....
-
11 hours ago, demco32 said:
Thanks but this would be for me +$3000 , shipment and import + sales taxes are just to expensive.
It's better so ship a complete car for parts.
No worries, just thought Id throw it out there !!
-
On 8/28/2023 at 10:56 PM, demco32 said:
I would like to purchase a car for parts.
Thanks.
I don't have a parts car, but I do have a pair of '32 Olds bumpers.
They were re-chromed & never installed on the cat.
I'd take $400 + shipping for the pair.
-
On 12/26/2023 at 1:50 PM, MercMontMars said:
Hi there, I’m located in FL and am looking for a carbureted small block Chevy motor or an older GM Flathead V8. I’m planning on putting it in my 52’ Pontiac, if I could find an era correct Flathead V8 that’d be great. Anything considered, thank you!
I'm in California & have a Flathead straight 8 from a '53 Pontiac wagon & its Hydramatic transmission.
It's been sitting many years but turns over freely.
If interested message me, if you can get it transported it will Cheeep.
-
On 8/9/2023 at 4:06 PM, MercMontMars said:
Hi there, is there any chance the flywheel inspection cover is still intact? Been looking for one for a while now. Would love more photos of the motor and dashboard to see what's left of it, also looking for an original throttle linkage and for the decorative silver piece that holds up the driver side interior sun visor.
Thanks!
Sorry for the time lapse, but I finally got to pulling parts from this Rig.
I have the inspection cover, the entire throttle linkage & think you asked about the under hood light & accessory mirror/light on driver door.
Let me know if still Interested.
-
On 12/1/2023 at 10:25 AM, dhughens said:
I could use a connecting rod with piston for mock up purposes but it probably wouldn't be worth your time. I am looking for a 268 core but I am on the east coast so your's doesn't look like it's going to be the one. dan...
Thanks for asking, But you are correct, I don't have the time to disassemble it for 1 rod.
I may have a rod for a Pontiac 6 from another long ago parts load.
-
One last time !!!
Will part it if someone needs anything !
-
On 9/8/2023 at 12:32 PM, wudndn said:
Is the engine is in the car
-
Just picked this one up & got it up on roller tires.
Original owner & Original Paint (as far as I can tell).
Appears to be all there, although someone disassembled the dash some.
Got it from the son of the original owner, said it was parked when the top stopped working some 30 years ago.
Has some rust, floors seem solid, 390 automatic.
Title is lost in storage, have 1 registration tag that shows original owner & plate number so sold with Bill of sale.
Can get current Ca. title on non-op in your name for a fee.
Located in Ventura Ca
$3500.00 as is.
Message or call Rick 805-746-9011 if interested.
-
I recently acquired a chassis for what was said to be a '28- '29 Dodge Victory 6.
I got this for the wire wheels, rear end & front brakes for another project.
The rest will be For Sale.
Radiator & shell, front fenders, Engine, Trans, Frame, Headlights & bar .. Possibly other stuff.
Located in Ventura Ca.
Call or Message Rick 805-746-9011
-
Getting closer to Scrap !!
No one needs a straight 8 Pontiac??
-
On 10/13/2023 at 2:23 PM, dhughens said:
Well, how about a core 249/268 engine for sale? Anybody???
I have a complete straight 8 in a '54 wagon.
See my add in PARTS FOR SALE.
- 1
-
Just played with this a lil bit more today, and it TURNS OVER FREELY !!!
MAKE AN OFF & COME GET IT BEFORE IT GOES TO JUNK..!!
-
Complete straight 8 Pontiac & Hydramatic transmission, currently in whats left of a '54 Wagon.
Must go soon, owner wants to scrap it !!!
If interested I'll hold him back as long as i can ... So you must be ready !!
Asking $500 & located in Ventura California
Rick 805-746-9011
-
13 hours ago, Vin cassidy said:
Hi I may have this wheel I have many about 130 of this style artillery but many variations I would need dimensions Vincentcassidy1@gmail.com thank you
Thank you for the reply, However, I switched the project up & now accepts GM 6 lug wheels.
-
Look up the various HARLEY DAVIDSON stamps.
They use a flat side "6" & "9"
Might be what you need 🤷♂️
-
Still have this ...
-
On 6/15/2023 at 12:17 PM, GM 1936 said:
Wanted 1934 1935 1936 and 1939 Chevrolet fender skirts call 505.991.1042
I have a pair of skirts off a '40 Pontiac.
-
Did you find a hub ?
I may have 1 but it's gonna take some looking ... Let me know if I should look.
- 1
1929 Dodge Victory 6 parts For Sale
in Parts For Sale
Posted
If someone bought it all or even most of it, they would get an even better price !!
I only bought it for the Wire Wheels & I hate junking any early parts ... but the clock is ticking & China is getting closer & closer ....