1234

I have a front shroud for a 1936 buick 40 series. There is no rust on this.I also have 4 doors off the same car.Rust free with good wood.Thanks, Bob 1234

Thanks Dave,I put it on the right side and it came out great.Bob 1234

Hi folks,many of you have been very helpful educating me about the world of cars of the 30's.My horn stopped working last week. I have checked the connections and the grounds.I thinking horn relay. My question is...is the horn relay located under the dash on the fire wall? I do see a relay in that location.Thanks, bob 1234

Hello,I have detailed my engine on my 36 and was wondering if the decal on the valve cover can go on both sides or just the right hand side.Also I have installed new spark plugs and noticed when removing the plug cover that only the first and last plug wire have rubber ends.I have ordered new replacements as well as a cap, rotor ect.The photo of the new wires seem to all have rubber ends.Thanks, Bob 1234

Hi,I'm in Utica.It's about 45 east of syracuse.I'll try to get some pictures out there.My e-mail is rmondi@adelphia.net.I havent figured out how to post a picture on this site but could e mail you if you give me your address. Thanks, bob

Hi,I have a 1970 electra convertable for sale.I have owned for 18 years.I put it in storage 12 years ago and has not run in that time.It's been in a garage the whole time.Body needs minimal repair.The interior is very good.Chrome is good other than the rear bumper.Has "as of 12 years ago" new radiator and wheel bearings.The frame is solid but could use repair over rear end as well as floor pans.I'm listing this car for $2,500 obo.It would be an easy fix.The 455 was strong when I drove it last. Thanks, Bob, 1234 Upstate,New York

I have 3 doors and trunk lid all in very good condition , the fourth door was cut at the window but have both peices.Also running lights ,tail lights all clean. Bob, 1234

Hi Dave,thanks for the info.I have a brand new copper filter and was wondering how to replace the old filter.It does'nt look like the unit comes apart.Bob, N.Y.

Thanks Greg.I have the regular air filter.I'll keep on looking at it. Bob

Thanks to Zonda C12 and groselle...the headlight and tail light mystery is over !! Had a bad fuse.Now,I have removed the valve cover for re painting. I sanded off the old decal and now I don't remember if the louver goes in the front of the valve cover or the rear.My thoughts are the front for cooling but that's a guess.Also does anyone know how the air cleaner comes apart to remove the old copper filter.Thanks again, Bob, N.Y.

Hi,I'm a new owner of a 36 buick.The headlights and tail lights stopped working.I'm looking for a fuse location but can't find any.Any help would be appreciated.Thanks, Bob

I am a new 36 buick owner.The headlights nad brake lights stopped working.I'm looking for a location for fuses.Any help wpuld be appreciated.Thanks