[NOS head gaskets #501397]

I have 3 NOS GM head gaskets Part # 501397 marked 1933-1949 These are for a straight 8

Make offer on 1-2-or 3     call 724-88two-4three 51

[victor manifold gaskets 1931-1935 models 80-90]

I have 2 sets of NOS victor manifold gaskets 1931-1935 models 80-90

Victor # 9619

I bought these  buy mistake

$30 a set or 2 for $50 + shipping  OBO

[3 NOS GM Head gaskets 501397]

[3 NOS GM Head gaskets 501397]

I have 3 NOS GM head gaskets Part # 501397 marked 1933-1949 These are for a straight 8

Make offer on 1-2-or 3

[? exhaust manifold gasket 1931 series 60]

Thanks will order them tomorrow

Internet has been down!

[? exhaust manifold gasket 1931 series 60]

Is the exhaust manifold gasket the same on a 1931 and a 1934 Buick series 60?

[setting the timing on a 31 8-67]

I think I will try the straw trick first .

If that doesn't work i will try bobs way.

Thanks

Dave

[setting the timing on a 31 8-67]

If I find the syn mark how far back do I have to turn the flywheel to be at the number 1 tdc

[setting the timing on a 31 8-67]

I've looked and can't find it.

I can find the syn mark for the second set of points but not the one for number one cyl.

It must be very faint.

[setting the timing on a 31 8-67]

Great I will try that as soon as I get The intake and exhaust gaskets.

should be able to locate the TDC mark with it.

[setting the timing on a 31 8-67]

Any one know if you can use a timing light to time these cars?

[setting the timing on a 31 8-67]

Thanks

already removed the side cover and reversed flush the rad.

that's why the manifolds are off . waiting on gaskets,

I can find the second timing mark on the flywheel for the second set of points

but not for the one for top dead center for #1

[setting the timing on a 31 8-67]

I can't find the adv timing mark . I  can find the syn mark.

Is it possible to use a timing light to time the car?

I have it apart now but will be wanting o time it to see if that is causing the over heating..

[Overdrive 55 Olds hydramatic or swap in complete 57/58 rear assembly]

On 11/2/2016 at 9:52 AM, Matt Harwood said:

I bet there's a swap kit for a 700R4 overdrive transmission that you could use. Maybe something like this: https://www.summitracing.com/parts/trd-0061/overview/make/oldsmobile or http://transmissionadapters.com/early_olds.htm

 

Alternatively, there's always a Gear Vendors overdrive. www.GearVendors.com

 

The summit racing adapter only works with the later olds engines.

I also would like to get rid of the cast iron trans. but the only one that makes an adap.. cost about $3600 for the adap. and trans.

[? removing water jacket cover 1931 80 series]

Thanks, but I went and pulled the intake and exhaust off and the exhaust manifold came in two peaces.

You could see that it has been crack for  some time.

Some one in the past used the old gaskets and some rtv.

Anyway I got the cover off and it  looks good .

I didn't find a lot of buildup around the cyl.

[? removing water jacket cover 1931 80 series]

Is  it possible to remove the water jacket cover without removing the exhaust manifold on a 1931 Buick?

[1934 master engine trans rear end]

1934 master engine trans rear end other  mechanical parts

[1955 olds hydramatic trans interchange]

I have a 1955 olds slant pan hydramatic trans thats is leaking .

Are they the same as the cad, pontiac trans?

It is leaking from the front of the trans..

[what series 1931 buick is this]

I get it its the wheel base just have to look harder.

[what series 1931 buick is this]

I'm new to Buick I had a 1921 Buick for a shout time but that's it.Can anyone tell me what series this is and how do you tell?

[1931 Ignition Lock Barrel]

Thanks that explains a lot.Will try to get the lock out .

[1931 Ignition Lock Barrel]

New to the Buick It looks like the ignition can be turned on without the key and the steering wheel will turn.

What does the key lock do?

[1931 Ignition Lock Barrel]

Any one have a picture of the lock pin and what size drill to use?

The car is not here I need to know what to take.

[WTB 1931 fuel pump]

Thanks will try tomorrow

[WTB 1931 fuel pump]

WTB 1931 fuel pump

Looking for a source for a rebuilt or new pump