whtbaron
-
Posts
773 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by whtbaron
-
-
Dodge got me again.... wasn't sure how different they'd be in Oz... nice work, thanks.
-
Not up on my Australian cars... any ideas?? It's the only pic I have and I don't think I'll be down there any time soon to take more.
-
Thanks guys... should have realized it was a mix of parts.... threw me off...
-
I keep looking at that grille shell and 4 cyl and thinking I "should" recognize this one... but I'm drawing a blank....
-
Border is still closed to non-essential traffic.... unfortunately this wouldn't qualify for an individual but commercial trucking is still allowed. Got a buddy that's trucking?
-
Jim... you should be able to edit your original post with the new title as per George's suggestion.
-
From Jim: " the stamped date on block indicates that on the 21st of this month this engine will be 100 yrs old, there is no plate or numbers to indicate serial or whatever, I have had this engine apart . the carb and distributor are not on engine as I took them off, both could be rebuilt, the dist only needs a set of cap clips and tlc, the carb needs a new bowl and lots of tlc, internally the bearings look quite good but one wrist pin needs to be freed up and the pinch bolt on that same connecting rod is stripped, all the valves are there but should be replaced and the seats need to be redone, the cylinders need to be machined but the rings are all free now . piston is 3 3/8" dia and stroke I take to be 5" "
From George: "1917-20 was a 24 HP motor. Final year 1921 was a 35 HP motor. Year of motor unknown. Appears to have a 3 3/8 bore and 5 stroke. Please cut and paste the owners info below with the photos . He is 50 miles north of the US border . I will email the name of town in a minute to add to the posting. Put a new posting as Free 1917-21 Briscoe engine. Must pickup in Ontario. "
" Motor is located in village of Thessalon. 50 miles from the border.On Google maps the nearest large place would be Sault Sainte Marie Ont which is a cross border twin to Sault Sainte Marie Mi and I am about 1hr east of there., "
-
Anyone going to post pics?
-
On 4/11/2020 at 7:16 PM, WQ59B said:
I agree that the dash looks like '32 Chevy, but I'm seeing a number of detail differences in the cab to call it a Chevy from '32 (or later). By the time the rear window gains the radiused corners and is inset, so do the doors. This cab has a radius-cornered rear window and 'squared off' doors. The door handle is uncommonly placed below the 2 beltline character lines, and the hinge is above them. This differs from period Chevy cabs.
Look at the reveal coming off the upper character line, then going up the A-pillar. That's got to be unique.I'm thinking that "cab" was built from a 32 Chevy 4 door sedan... a 2 door would have longer doors. This places the door handles below the beads, and if the rear of the body was welded to the back of the B pillars, it explains that sharp increase in altitude behind the doors. Top hinge lines up with the bottom of the side window. Rear window looks to be about the same shape. Also looks like he bent the front of the hood to match the grille. I bet if it was clamped down properly it lined up well at one time.
I'm having problems finding a good shot of that front bead detail with no 2 toning or pinstripes, but I think it's there as well. Hard to tell, but I think I can see a weld on the roofline even with the backs of the doors where the back of the body was mated to the front.
-
2
-
-
Are those back fenders wide enough for a roadster? I was thinking maybe a touring. Wonder how much of the sheet metal is under the grass?
-
Thanks guys... I was leaning towards Dodge but wasn't sure. I didn't even notice the horn button. So we're talking 1921 ish? So far my parts stash includes a Whippet frame and a flathead Dodge 6 so a Dodge cowl should fit right in. I know the landowner and I'm pretty sure we can work a deal.
-
Yep.... afraid I'm serious. Not much to go on with this one... front half of a 4 door touring .... I'd guess somewhere between 1912 and 1925. Back doors were suicide mounted since the latches are on the back of the remaining B pillar. Windshield uprights and door latch are a little unusual ( maybe Dodge?). I've been looking for a non-Model T cowl for a speedster project and I'm thinking this just might be it... the more non-descript the better, but I have no clue what it is. Thoughts? No, it will not be going on Ebay...
-
Up until now, you've been hitting specific brand threads... maybe try posting it in the "what is it" section? Guys around here are pretty good with the ID's... maybe you just haven't shown it to the right person yet. Or maybe it's really that rare...
-
There is a pre-war speedsters page on Facebook.... the administrator builds some pretty decent looking boat tail bodies for Model A's . If you aren't up to the challenge, you may consider purchasing one.
-
Bloo beat me to it.... somebody in the other thread mentioned Moon. I've got a 23 and unless they changed a lot by the mid to late 20's, I have my doubts. Saying that, I haven't got the Moon front axle so I haven't seen that. That's a very stark bare frame. Someone mentioned Stutz having that brake system... you'd kick yourself if you scrapped it and it turned out to be one...
-
1
-
-
Why scrap it just because you don't know what it is? Toss some more readily available power train parts on it and go... speedster all the way.
-
So is that a difference between the REO and Olds? This 1915 REO roadster seems similar...
-
The sharp drop of the front springs and the shallow axle dip seems to suggest REO/Olds.... Headlight buckets suggest 1915 or slightly newer...
-
Hmmm.... do you think that axle dips enough for an Overland?
-
My best guess would be circa 1915 Olds?
-
Another pic off the net that I can't identify... anyone?
-
Be careful with the thicker silicone based concoctions... not so much with primitive transmissions, but more-so with motors. Chunks of silicone can be squeezed inside and roam around causing problems. I'm surprised the teflon/dope solution didn't work for you. Have you tried cleaning up the threads? Also inspect around the hole closely. If someone has been wrapping too much material in there, if may be causing cracking around the drain hole. Normally for nasty ones I use one coat of dope... a couple wraps of teflon... then apply more dope and "usually" that fixes it. If you can get access to some small taps/dies for NPT maybe try lightly cleaning the threads. With newer automotive oil pan drain plugs, you can also get oversized plugs but I doubt you would get one in that style of plug/thread. Might be worth checking out if the problem persists, but again, be careful because going too big can split a casting or pan.
-
Apparently the car has been yard art since 1975 and now has a new owner that is hoping to put it back on the road in some shape or form. Probably not scoring any brownies with the purists, but at least it wasn't crushed. And by the way, the guys you helped out say "Thank-you"... as do I.
-
Bad pic... but this one is said to be a 27 Super six ... looks to fit all the criteria...
-
1
-
very early auto for you to id the marque.
in What is it?
Posted
There are also groups on Facebook that cater to the license plate collectors. You might try there, but sometimes you get the level of information you paid for...