Jump to content

usmcfred

Members
  • Posts

    27
  • Joined

  • Last visited

    Never

usmcfred's Achievements

250+ Points

250+ Points (1/7)

  • Collaborator

Recent Badges

0

Reputation

  1. Need a NOS or good used INTAKE MANIFOLD without cracks or repairs for a '50 to '53 Buick with 248 or 263 engine. The larger 320 cu. in. intake will NOT fit. All leads appreciated! Thank you, usmcfred
  2. Looking for a NOS or decent used INTAKE MANIFOLD for a "small block" straight 8 '53 Buick Special. I believe the intake from any '50 to '53 248 or 263 cu. in. motor will fit. The larger displacement 320 will not. Many thanks, usmcfred
  3. Thanks for the input guys. I'll follow your suggestions and report back once I've located and corrected the culprit for the benefit of others who might have a similar problem. usmcfred
  4. I'm getting an intermittent "whistling" sound from the area of the Carter carb on my daughter's '53 Special (STRAIGHT 8). My first reaction was to look for a vacuum leak, but I've found none. That does not mean there isn't one, but I can't locate it if there is. Can someone knowledgible about these cars give me some advice as to how to remedy this? It seems to only occur when the car is warmed up and at normal operating temperature. Upon cold start-up, I don't hear anything. Many thanks. usmcfred BCA
  5. <span style="font-weight: bold">WTB '53 SPECIAL TRUNK EMBLEM DISC WITH SHIELD</span> Plater ruined mine so looking for part #1346878 in very good to excellent condition. It is the detachable 3" round disc containing the in-painted Buick shield. All leads gratefully accepted. THANKS! usmcfred
  6. Excellent repro's are available at Bob's Automobilia as well as sometimes appearing on ebay auctions. They are not cheap however are actually better than originals (if you could even find a NOS part) as the modern colors are not affected by UV like pigments used in the 40's and 50's. A new plastic insert really highlights the front of the car compared to an old sun faded one. Good luck! usmcfred
  7. Where is the exact location for the brake light switch on a '53 Special? I looked at and around the master cylinder but don't see it there. THANKS!
  8. Pls adsvise on the correct color for the following '53 STRAIGHT 8 engine parts: Oil breather/filler cap ... black or turquoise? Generator bracket ... black or turquoise? Water pump pulley ... turquoise or black? THANKS!
  9. WTB For '53 Special 41D [color:\\"red\\"] a NOS or re-chromed "emblem and base" for the trunk lid Buick part # 1161788. This is composed of two die castings ... the base that holds the red plastic BUICK/EIGHT monograms, and the 2.5" round disc emblem with painted Buick crest part #1346878. PLEASE HELP! Thanks! Dora BCA 41573
  10. Anyone parting out a '53 Special 4 Door Sedan?? I'm looking for a nice front door glass. Must be OEM <span style="font-weight: bold">LOF E-Z Eye</span> which has a very slight tint. Yes, I have already checked at local glass shops that can cut flat safety glass using my cracked piece as a pattern, but no one can match the very light tinting of the LOF E-Z Eye. If you have an LOF E-Z EYE window that is not delaminating or bubbling and has no deep scratchs or cracks, please contact me. Many thanks, usmcfred
  11. Thanks Matt. Pls send pix to fhammerle@pep-corp.com. Fred
  12. Thanks Chris, however the '49 bombsight is quite different than '53. Thanks for your reply. Fred
  13. Rod, Both come up fairly often on ebay. Just refine your searches and place in your Favorites and you will automatically be notified as new auctions are listed for these items. I've seen Buick tissue dispensers and gas door moldings within the last month. Good luck, usmcfred
  14. Please HELP ... looking for a decent hood ornament for a '53 Special. Need not be show quality as it's for my very nice driver. Just need a complete part with most studs and attachments unbroken and with minimal pits and shiny chrome. THANKS!! usmcfred [color:\\"red\\"]
×
×
  • Create New...