tailfin58
-
Posts
70 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by tailfin58
-
-
Dear 60 Buick,
Going by my limited Knowledge of similar 1959-1961 Cadillac X type frames,
you will find the convertibles have an additional pair( LH & RH) body supports
extending out from the center towards the anchoring for the top cylinders
near front of the rear floors. Also I noticed on my 61 Cad Convert
that there is an extra Gusset plate rather crudely welded on top of the forward part of the x just behind the end of the transmission. I would think the shop manual might have a frame diagram for this.
Good Luck with your project.
John B
Western Mass
-
Where? oh Where ? oh WHERE ? .... is the Mullins ?
-
Dear Keefer,
Where are these located ?
can you bring them to any shows in the Northeast ?
Thanks John B
-
corrected link to New England Region Cadillac LaSalle Club...
and main club page
-
Dear Thug,
These are not common as I'm sure you know.
they are basically shortdeck 4 window series 62 Cad sedans
and look kinda Sporty for a CADILLAC especially compared to
the six window buble back windoe style 4 doors.
We onced ownd a light yellow ex California '62 Park Avenue
wich was the short deck version of a 4 window Sedan Deville
we purchased it from a collector in Vermont swapped out
the "stuck" motor and let it go far to cheaply at HERSHEY
We DROVE it down to Hershey PA a 6 hour trip from Western Mass
only to wind up selling it to a guy from Springfield Mass about 40 miles EAST of us !
If you are in the BOSTON Area.. DO NOT MISS!
Cadillac Day at the LARZ ANDERSON Museum in Brookline
on Sunday May 17th it is a BLAST and just for CADILLACS
OPEN TO running rusty OR fully restored so bring yours along !
website www.mot.org and www.nerclc.org
-
A young friend of mine just starting out in the old Car hobby has acquired a barn fresh 1951 Buick Special 4dr sedan.
The car is ready for its first roadtest run except for the need to repair or replace the existing radiator.
Does any one know what other year/ make / model's Radiators might interchange ?
(My Hollanders reprint stops at 1950 of course !)
Do any readers in the upstate NY or surrounding areas have a good one for sale ?
From his decription I believe this has the "Honeycomb" pattern radiator
is this Correct ?
Does any one have experience with re-coring one ?
are new cores avalable ? Cost estimates ?
Thanks for helping a nother Hobbyist get on the road !
-
A young friend of mine just starting out in the old Car hobby has acquired a barn fresh 1951 Buick Special 4dr sedan.
The car is ready for its first roadtest run except for the need to repair or replace the existing radiator.
Does any one know what other year/ make / model's Radiators might interchange ?
(My Hollanders reprint stops at 1950 of course !)
Do any readers in the upstate NY or surrounding areas have a good one for sale ?
From his decription I believe this has the "Honeycomb" pattern radiator
is this Correct ?
Does any one have experience with re-coring one ?
are new cores avalable ? Cost estimates ?
Thanks for helping a nother Hobbyist get on the road !
-
Actually you would probably find the PARTS BOOKS
are worth much more than the parts !
Keep the oldest and the newest ones and a
good range in between...
as GM MASTER Parts books usually cover
about ten - fifteen years back/ book
Its not necessary to have EVERY year
to look up parts
You Can sell the extras on E-bay
Inccidently when BUYING a Parts book...
try to find one a year or two NEWER
than your car as this will show if any
slightly later model parts interchange
for your project car
-
Check out this Incredibly well preserved one that
just sold for a WHOPPING $295 plus shipping on EBAY
Seller Zonzloid Item number: 290100598981
http://cgi.ebay.com:80/ebaymotors/ws/eBa...598981&rd=1
Note that the Trunk "Crest" as well as the similar but
differently shaped "Hood Crest" each consist of TWO Pieces :
a Gold-Colored Anodized "BEZEL"
and the reverse painted clear plastic "INSERT"
Give up right now... on EVER finding another original
INSERT in anywhere near the condition as this one ....
the RED fades very quickly after being exposed to sun and
the plastic becomes brittle and checked.
The best source for these and many other pieces of
Cadillac "Jewelery" is www.mcveys.com
Expensive yes,but very high quality and excellent fit.
A friend said, "You only cry ONCE... when you write the check,
but not again when you receive the part !"
The similar but slightly peaked-shaped Hood Crest is
even harder to find , but usable replateable bezels often
show up at EBAy and the flea markets,
but for Show Cars Mc Vey's has those as well.
Be sure to join the 1958 Cadillac Owners Association
the official home for "MOTORDOM'S MASTERPIECE"
Ask for 1958COA member Craig when you contact McVey's
Tailfins Forever !
John B
Western Mass.
-
Dear Erick,
Some time ago I acquired an Original GM Factory Flat Rate manual for
your 1929 Viking. Am I correct in thinking these cars were only produced for
about 18 months ? How many were produced ? Any estimate of survivors ?
Is there a club or registry ?
Although the Flat Rate Manual is currently in storage with the rest of
my swap meet literature, I may be able to dig it out and provide you some
Pictures when I unpack at the Spring Rhinebeck NY carshow/swapmeet
in early May. (Do NOT Miss this show if you live in the North East !)
Congratulations on finding TWO !
of these rare Automobiles,
John B.
Western Mass.
-
Dear Thug,
Be sure to check out the Cadillac LaSalle Club website,
as well as the very active new England Region with its own
website at www.nerclc.com
If you contact our newsletter editor... Cadmanjoe@aol.com
I'm sure he will send you a few complimentary
back issues of our regions news letters.
I also am restoring a 1961 Cadillac and live in Western Mass.
I have parted several '56-'62 Cads and also have the Factory
Cadillac Master Parts Books to help sort out the interchanges.
Tailfins Forever !
John B.
<img src="http://forums.aaca.org/images/graemlins/smile.gif" alt="" />
-
Dear Drivein,
in surfing Ebay this eve
I see seller "seaofpaper" has a bunch
of Thompson Items up with part numbers
and application noted
-
Try Searching Ebay motors literature section,
One Seller named DelcoJoe often has old catalogues up for sale.
Ideal would of course be to find a Thompson Application Catalogue
but any brand cross reference to Thommpson would at least point you in the
right direction, TRW, Clevite, and Federal Mogul
were a few of the Larger survivors into the 1980s,
LIKE most industries the aftermarket car parts business
is being reduced to a few large Players / Conglomerates ...
Dana and Federal Mogul are the "Coke and Pepsi" of Car Parts
-
This is a '48 Chevrolet as evidenced by the
vertical "Tee" bar in the grille to distiguish
it from the nearly Identical '47 Chevy.
Not psoitive from this angle but it looks like
a 2 door "Town Sedan" Also Judging by the shape
of the rear side window,and Vertical "B" pillar.
Also guessing this is the midrange FLEETMASTER trim.
Base Style Masters had a little less trim I think.
My younger brother currently owns the shorter windshield
Forward Slanted B Pillar fanciest trim
2 Door FLEETLINE Aerosedan perhaps the flashiest
Art Deco styling for the money ever offered by GM.
Even though priced near the top of the line
Fleetline Aerosedan Coupes outsold even the four door sedans !
These were very popular,comfortable, and well made cars.
Thanks for the photo !
-
As the Irish had a Saint named Patrick,
who we are told "drove all the Snakes From Ireland "
Perhaps we in the Northeast Need to find a SAINT
who could drive all the snow out to sea
By....oh Say.... March 17th...so we could get on with our RELIGION !
Any suggestions on a name? .... if we can find Him or Her ?
-
Dear 1937HD45,
I had been e-mailed the photos by my Cadillac Lasalle Club buddy,
"Cadmanjoe" in Boston. After I posted it this morning,
before work, I e-mailed him the link and jokingly...
said "We should have an answer by Noon today !"
Thanks for proving me CORRECT ! ...and with twenty minutes to spare !
I don't have my copy of the "OLD TESTAMENT" near this computer.
As I often refer to the essential
"Standard Catalogue of Early American Cars"
by Beverley Kimes et al.
But NO DOUBT you too, like to read a few chapters from the "Good Book"
every evening before retiring, and again upon arising in the Morning,
as I do. After all one must remain devout to one's religion must'nt we !
Thanks again,
Tailfin58
Western, Mass.
BTW Find any good CORBIN info sites on the Web ?
-
-
-
Probably any GOOD Quality 10W30 oil will be okay think it may take 6 quarts with filter (use a WIX available at NAPA or CARQUEST) but check this on the stick after you've dumped in 5.
Regular Dextron III ATF will work, we have had excellent luck with substituting one quart of the ATF with a Transmission Additive Made by LUCAS Oil Products
Really helps them Shift smoother.
They do also make a excellent engine oil additive as well.
If the car has sat a while change the oil a little more frequently for the first few changes as this helps clean out the sludge.
Don't forget to get the chassis greased and take the time to carefully lube the hinges yourself wiping up the over spray.
A good wax and polish and you and your CADDY will be ready to cruise and collect the smiles remember to bring your camera and JOIN THE CLC Club ! !
-
Kghia
Yes ! it is still there , pictures in Vol. 3
were taken Saturday Jan 6th of 2007
-
After another Fruitful Trip to Curboy's Auto Salvage on
the beautiful warm (65 degrees!) Saturday of January 6th 2007
I have added some more photos and commentary to my third web album
http://picasaweb.google.com/CaptainTailfin
The Owner said to keep on coming and buying until its gone
Curboy's Auto Salvage 508-347-9650
http://www.google.com/maps?f=q&hl=en...mp;ll=42.112232,-72.054691&spn=0.110789,0.2314&om=1
-
Dear BiggarMike,
Sorry my friends did NOT report seeing any Lincoln Zephyrs....
Heck, I hardly ever see them at Shows ! Cool Cars though !
Plan on heading off for a return trip tommorow to try and see the WHOLE Yard before it's gone...
Tailfin58
-
Please see Update, and replies as listed under general discussion categorey
-
Seem to remember the "Cartridge" type filter for my '58 Cadillac
was a WIX #51100 which would also be a NAPA #1100
(same filter made by WIX just drop the first digit)
or a Carquest 85100 (Also the same Wix Filter !)
just substitute an 85-XXX for the 51-XXX.
Incidently these are MUCH better Filters than a Fram
cut one open as I have, and its easy to see !
That is why both NAPA and Carquest the two biggest
Parts selling Groups for garages sell relabeled WIX made filters.
And why Walmart sells FRAM where a $5 dollar filter is $4 bucks of advertising
If the WIX #51100 is NOT your filter, you can find it by SIZE at
41 International with 20 original miles
in General Discussion
Posted
I am Surprised no one has yet mentioned an ASSYMETRIC Item on this old "Binder"....
Careful Observation of the excellent photos should reveal it immediately...
However I must admit I KNEW where to look....
by seeing this feature on a similar Vintage IHC Cabover in Vermont..... ANY ONE ???
And further more can any one provide a reason ,speculation , guess as to WHY ?