grandpadodge

Thanks B. Kinker ! I'm also looking for some rear bumper guards for the rear and a clock for the 42.

I recently purchased a 42 Dodge Business Coupe and am wonderinf if a reproduction rubber trunk mat is available. If not,is there some wide rubber matting available somewhere that I could make one from. Thanks ! Reg

Are you sure you have the spark plug wires in the right order after removing them for the valve cover removal and cleaning?

I'm looking for dash parts for my recently purchased 1938 1/2 ton Dodge. The previous owner lost the top part of the dash,gauges,windshield crank,etc. Any ideas? Thanks, Reg........regoevans@sbcglobal.net

I just purchased a 1938 Dodge 1/2 ton pickup and want to restore it to as close as original as possible. The previous owner lost the gauges,windshield crank,upper removable dash,and knobs and cables. Does anyone here have any of these parts or know who might? Thanks in advance for any help. You can email direct to regoevans@sbcglobal.net if you like. Thanks !

Is this what you are looking for? http://cgi.ebay.com/ebaymotors/ws/eBayIS...20&rd=1

I am restoring a 35 Dodge sedan and want to keep it as original as possible. All the upholstery is still there but very dried out and moth eaten. Is this material still available? It's mohair I guess. I'm also looking for an original passenger side sun visor. It's an elaborate thing with chrome arms on both sides and a dark see through plastic visor. Anyone here have one for sale? Thanks !!

It would to be tough to venture a guess without more info on the condition. Are ya able to post some photos?

I'm sorry you were offended by my comments Matt. I was offended by Shane's comments about the rudeness of this forums members. I was merely holding the door open that he was already headed for.Peace dodge brother. Gramps.

I am restoring a 35 Dodge sedan and want to keep it as orriginal as possible. All the upholstery is still there but very dried out and moth eaten. Is this material still available? It's mohair I guess. I'm also looking for an original passenger side sun visor. It's an elaborate thing with chrome arms on both sides and a dark see through plastic visor. Anyone here have one for sale? Thanks !!

Hello, I'm looking for a sun visor for my 35 Dodge sedan for the passenger side. The one I do have is kind of an elaborate affair that has chrome arms on both sides and folds down. The visor part is a dark see through plastic material. Anyone here have one for sale? Thanks !!!

Maybe this is what you are looking for. EBAY !!!! http://cgi.ebay.com/ebaymotors/ws/eBayIS...;category=34207

Hey Furyone....have you tried this forum? Lots of guys there that specialize in 39-47 dodge trucks. http://autos.groups.yahoo.com/group/39-47Dodge/

Is there a source for carpet and upholstery nearer to Calif. for my 35 Dodge sedan?

I have a 35 Dodge sedan that came from Arkansas last year. I also live in Calif. and the DMV used the engine # Reg in Northern Ca.

Oops !!! typo.....it's a 58 Sweptside truck.

Hi Again, I am restoring a 56 Dodge Sweptside truck and need a gravel shield for the passenger side rear wheel well. These came on late 50's mopar wagons. I'm also looking for the drivers side lower bed side long stainless from a two door wagon. Help !!! Thanks, Reg..... email reglisa@jps.net

GO....GIT...BE GONE !!!! Drop a Chivy 350 in it and weld on a Vega front end and get one of those chrome plated bare footprint gas pedals !!!! Man.....I hope ya never inherit Abe Lincoln's cabin or Betsie Ross's flag. Talk about RUDE......I can see it now...pink stucco covered logs and vinyl stars and stripes.

This book I spotted on ebay would be a big help in your parts search. http://cgi.ebay.com/ebaymotors/ws/eBayIS...;category=34218

Just thought someone here might need these. http://cgi.ebay.com/ebaymotors/ws/eBayIS...IT&rd=1

I have a 51 Plymouth radio. Don't know if it is the same as a 50 though.

I GOT IT !!! Thanks for your help NIKOLA !!! Now...does anyone know where I can find one of the spring steel retainer thingamabobs that holds the lens in place . I'm missing one for my other tail light.

Well shoot !!! I have pressed in on the glass lens with two thumbs at the bottom and used the palm of my hand and the lens just barely turns. This is a NOS tail light without any rust and it won't move. Any more pressure and I am sure the glass lens will break. Even if the bottom of the lens would push in I don't understand how the lens would come out past the chrome bezel because it is a perfect circle and is a larger diameter than the outer bezel. What is up ????? I'm about ready to get a hammer. HELP !!!!!

Need some help here before I break something. I need to change the bulb in my 35 Dodge sedan tail light and there aren't any screws or visible means of removing the chrome bezel to get inside the light bucket. Do any of you have any experience with this type of tail light. I don't want to ding it up or crack the lens. Thanks !!!

It's his car but if it was mine I would leave it stock. It's a little slice of history. I have a 35 Sedan I am leaving stock. Can you send me some photos of your car. Thanks, Reg reglisa@jps.net