Terry29-26
-
Posts
114 -
Joined
-
Last visited
Never
Content Type
Forums
Gallery
Events
Posts posted by Terry29-26
-
-
$118 to fill my GMC SUV with one 48 gal tank.. glade I only do it every other month..
-
Bob
There is a brass pin that holds the cylinder in place. Look on the bottom of support casting and you will see a small hole about 1/16 inch in dia. This pin must be drilled out,then if the cylinder isn't swelled up it should come right out.
Terry
Feel free to call me at 608-463- 7483 for more help.
Terry
Feel free to call at
-
Ford truck around 1940
-
-
-
Some girls just can't make up which Buick is best. Know where and when these photos were taken?
-
If fellow is 20" then rim would be 21" and is not 29 buick. Hub is for 1928 master rear.
Terry 29-26
-
Try the coker link to the left,,, i think they have the information u are looking for.
-
from your home be it 1 block or a thosand miles +.. driven is driven as long as it doesn't come off a trailer or truck.
Terry 29-26
-
looks like 29 buick rear bumper for car with rear spare tire mount. over all length will tell u what model. check with bill mclaughlin and he will tell u the corect model.
Terry 29-26
-
Use a hole saw to cut it out. tractor tires make good replacement couplers.
Terry 29-26
-
Dave:
Post a photo of the one you are trying to match. I have several caps that I don't know the year or model they fit.
Terry 29-26
-
Mr Earl:
Sorry to hear of your crash: Like others have stated all may not be lost, The files are still there u need to find the problem and corect it. Find a computer shop that will trouble shoot you unit and repair it.
I have a custom built computer with 4 hard drives, every file is written to two hard drives so if one goes down the other is still usable. Cost was $500.00 . I don't have to worry any more about backing up files. If the the rest of the computer fails all I have to do is install the old hard drives in another machine. Its kind of like changing motors in cars. Even hard drives can be rebuilt without data loss.
Terry29-26
-
Check with your power company and ask what the time period is for your demand meter.Most are 10 to 15 min. Starting one moter will have no efect on demand.Starting every thing after power outage should not effect meter reading.Running every thing at full load longer than their time setting will raise the meter.
I hope this answers some of your questions.. Be safe.....
Terry29-26
-
Without geting the books out..(I'm lazy) there are several ways which power comp. deliver 3 ph power. Depending on transformer windings there is two types of 3 ph.. If you have 110v. to ground on all three legs you have no problem which wire goes where but if you have one leg that is 208v. to ground (known as hot leg) then care must be taken to keep this leg isolated. I have had this system on the farm for 37 years with no problems. With this system there is still 208v. between legs but one leg will read 208v. to netural/ground(and they are not the same}.
The reason one leg is seperated on machines is to isolate this Hotleg so that any thing which might use only 110v. (lights.fan motors recpt. ect..} does not get wired 208v.
If you are not shure of what you are doing spend the few $ and hire someone that does. Best life insurance you can buy.
Terry29-26
-
Lin;
29 buicks have (or should have) 20 inch wheels. 28's were 21 inch and 30's were 19 inches. Wheels on 29's depend on model,standard or master.
Check out the SILVER ANNIVERSARY BUICK club. www.29buick.ca is a good site for 29 owners. W.E. McLaughlin puts out a news letter for 29's. bill@29buick.ca
I have some wheels for standard (series 116) buicks and parts car with extra parts.
Terry29-26
-
add me yo the list
-
Pete:
Post an Email address with your request and you will get more photos.
Terry 29-26
-
West:
The 29 you saw in Boston was in fact Bill McLaughlin's. Bill prints the SILVER ANNIVERSARY BUICK NEWS LETTER. Check out his web site at www.29buick.ca.
Send me a PM and I can send you photos of his and other 29s.
Terry 29-26
-
Now I know why Buicks sound so sweet:
Terry29-26
-
John
South east corner of Monroe Co. There are some pre war Buicks in this area,four in and around Tomah with more down by Baraboo. A few owners belong to the BCA but are not very active in the club.
I can't get my Email to work right now but when I get it up and running I will send you a P/M.
Terry 29-26
-
John
How far from Kendall?
Terry29-26
-
This is a right side quick change HOUK wire wheel cap for Buick. Asking $65.00 plus S/H. It has nicks and scraches but threads are good, very restoreable.
Terry29-26
-
Dave:
If you are coming soon it would be faster if you turned your 59 around and put it in drive.
Are you planing to have a f/s page? I have been thinking of selling my 2 59's and think that would be a good place to find a new home for them.
Terry29-26
You know you've been in the hobby/business a long time when...
in General Discussion
Posted
When your grandson is finishing the project you sstarted with your teen age son..