Jump to content

IRON HORSE

Members
  • Posts

    9
  • Joined

  • Last visited

    Never

Everything posted by IRON HORSE

  1. GOOD DAY, LOOKING FOR HEAD LIGHT ACTUATOR MOTORS, OR PARTS. I WAS TOLD THAT REPLACEMENT PARTS FOR THE MOTOR ARE AVAILABLE. I WOULD BE THANKFUL IF SOME ONE WOULD POINT THE WAY. BEST TO ALL IN THE NEW YEAR. JOHN JFORR123@AOL.COM
  2. GOOD DAY TO ALL, IN NEED OF ACTUATOR (RIGHTSIDE) PASSENGER SIDE. IT HAS BEEN SUGGESTED THAT PARTS FOR REBUILDING ARE AVAILIBLE ? CAN YOU HELP ? THANKS, JOHN JFORR123@AOL.COM
  3. HI ALL,<P>LOOKING FOR A HAZARD/TURN<BR>SIGNAL MODULE, CAN ANYONE BE OF HELP.<P>RIGHT SIGNAL WORKS, LEFT LIGHTS BUT DOES NOT FLUSH. <P>I AM TOLD THAT ONE SIDE (MODULE) WORKS THE RIGHT,THE OTHER WORKS THE LEFT. IS THIS CORRECT?<P><BR>THANKS,<BR>IRON HORSE<BR> JFORR123@AOL.COM
  4. IRON HORSE

    codes

    code read outs:<P>eo26<BR>eo47<BR>anyone know what they are.<P>thanks<BR>Iron Horse
  5. IRON HORSE

    O2 sensor

    Hi,<BR>Just replaced mine, not hard at all. <BR>Needs socket made just for that, Auto Zone has them for rent, $15.00, refundable.<BR>Tools: socket, extention, ratchet.<BR>Disconnect wire,insert wire into socket, wrap wire around extention, if engine is cold, and you can't get it out do not try to force it. <BR>Leave tool set up on O2, (you may want to remove ratchet)run engine to rise temp.(use gloves very hotttttt)!!! this should make it easier to remove.<P>Good luck,<BR>Iron Horse<BR>4907<BR> jforr123@aol.com
  6. To all,<BR>I have what appeared to be a transmssion shudder when in O.D. <BR>I have read many posting, and many hours reviewing the manual. The more I read, it seems it could be any and all of the suggestion.<BR>Trying to isolate problem between engine or tranny. One suggested, apply brakes, RPM picked up,shudder went away. SO now I'm thinking tranny.<BR>What one has to do with the other I don't know, but this is the changes I have made.<BR>1. Had little or no heat when I got the car.<BR>Read engine had to operate at a certain temp.<BR>Replaced thermostat.<BR>Engine performance was better, but still had shudder.<BR>2. Replaced O2 sensor, and guess what, shudder appears to be gone.<BR>Your guess is as good as mine????<P>Hope this helps,<BR>Iron Horse<BR>4907<BR> jforr123@aol.com <P>[ 09-27-2001: Message edited by: IRON HORSE ]<P>[ 09-27-2001: Message edited by: IRON HORSE ]<p>[ 09-27-2001: Message edited by: IRON HORSE ]
  7. HI ALL, <P>ALL GEARS APPEAR TO WORK, THE PROBLEM IS WHEN IT GO'S INTO OVERDRIVE. THE RPMS DROP DOWN, AND SHUDDER STARTS. (ABOVE 45 MPH).<BR>PULL IT OUT OF O.D. AND IT STOPS. PUT IT BACK IN, SAME THING.<BR>FOR SOME REASON IT DOES NOT DO IT ALL THE TIME, MAYBE DO TO BEING HOT/ COLD ENGINE TEMP.<BR>IT ALSO SEEMS TO GET BETTER (GO AWAY)THE FASTER ONE GOES.(70-80)<BR>I HAVE BEEN THROUGH THE MANUAL, AND THE MORE I READ, THE MORE IT COULD BE ALL THE SUGGUESTION.<BR>ANYONE WITH AN IDEA, PLEASE DROP ME A POST/ LINE.<P>THANKS,<BR>JOHN<BR> JFORR123@AOL.COM<p>[ 09-23-2001: Message edited by: IRON HORSE ]
  8. When statring car, system goes through checks, comes up with low a/c.<BR>When I use the system check, it reads B448. <BR>Are they one in the same? If not, does anyone<BR>know what B448 means?<P>Thanks,<BR>Iron Horse <P> <P>[ 09-17-2001: Message edited by: IRON HORSE ]<BR> jforr123@aol.com<p>[ 09-17-2001: Message edited by: IRON HORSE ]
  9. REPLACED LEFT FRONT TURN SIGNAL, STILL NOT WORKING. IT HAS A VERY FAINT BLINK, AND I MEAN FAINT. REPLACED IT WITH THE RIGHTSIDE, SAME THING.<BR>RIGHT SIDE WORKS FIND,WHEN AN ATTEMP TO USE LEFTSIDE THE INDICATOR ON DASH STAYS ON WITH NO SOUND. LEFT REAR APPEARS TO BE WORKING FINE.<BR>YOUR INPUT WOULD BE WELCOMED.<P>THANKS<p>[ 08-29-2001: Message edited by: IRON HORSE ]
×
×
  • Create New...