bwbugay

Looks like 1929 or 30 chevy radiator shell and engine side cover. The rods do not look like Chevy.

This has been in storage for several years when I found it . It had been all cleaned up and then the clean cast iron turned brown . I opened it up and all that I can looks good, it turns and shifts all gear by hand and has the spdo connection and a back up light switch on it. $400 . you can come check it out here near Richmond VA. E mail me if you want to. bwbugay@aol.com

Here is a pair of Foxcraft fender skirts for 1966-67 Nova's exc. Station Wagons , still in there original box . These are not bent up or dented. I see only 3 of the little clamps , I think there should be 4 ??? . $ 120 + ship. you can e mail me if you want . bwbugay@aol.com

I have had these for many years and could never find what they are ?

Hi Chuck, I am interested in this horn and bracket. E mail me bwbugay@aol.com

Here are 10 NORS valves for 1949-51 Mercury and 1848-50 Ford V-8's. These have 1.510" dia. heads and are 4 .830" long. $50 + ship. They where found I a collection of old car parts. Email me if interested . bwbugay@aol.com

I know where a 1926 Continental 4 cyl is. It is from a 26 Commerce truck . would that do? Bwbugay@aol.com

Here are 3 cases of head light bulbs ; GE 2331 case of 10 $25 Eveready 1133 case of 10 $30 Tung-sol 2221 Case of 9 $20 some corrosion on them all + shipping I have others also. Email me if interested bwbugay@aol.com

anybody know what this NOS inner fender panel is for ? It is 47.5" long and about 14" high. Has been hanging in my garage for 25 years now. I think it is TRUCK ?? Need HELP

I have added a picture of instructions . Yes this would stick to inside of windshield and wired into car electrics and you would look through it as you drove.

Any ideas as to What is this from ?

Here is a old Stewart vacuum gasoline tank system , stamped on number 113-AG . Looks to be all there and nor rusted out on bottom . $90 + ship. Email me if interested bwbugay@aol.com

Here is a NEVER USED HD wheel puller MASTER BRAND still in its original box . It has 7/8" threads and printing on box states that it is for Buick and Dodge $24 + ship. E mail me if interested bwbugay@aol.com

Here is a old box of replacement door latch springs (18 of them ) the box states these are for 1929-37 vehicles ? $35 + ship. E mail me if interested bwbugay@aol.com

Here is a working fog light about 7 1/4" dia. with mount, Has ( Yankee Auxilary Lamp ) No 49 on it. The chrome body is scuffed and scratched some and there are a couple small dents , lens is good $45 + ship Email me if interested bwbugay@aol.com

bump

Here are 2 never used brake cables that I believe are for 1941 Olds. They are about 59" long . $85+ ship. Email me if interested . bwbugay@aol.com

Here is what i believe is a 1935 Olds. electroloc ignition switch with working key. The wire looks good in the coil cap , and cable is about 17" long. $50 + ship Email me if interested bwbugay@aol.com

the 3 short stems are (never used ) the others are. $35 + ship. Email me if interested bwbugay@aol.com

Pfits , Yes there are numbers on the 3 shafts with pilot shafts on them ,but no numbers on the shaft with out a pilot shaft. do you know what vehicles used these ?

Any Ideas of what these are for ?

bump

Here is a aluminum 4 spoke steering wheel hub with a .875" dia. hole and measures 16" across. There numbers cast into it ( C-18866 ) . I do not know what it is from but it is in good condition. $50 + ship. E mail me if interested bwbugay@aol.com

Here is a working Walker screw jack casting date B- 21-3 $25 + ship E mail me if interested bwbugay@aol.com

Schrader Balloon Tire Gauge $14 . SOLD POP TOP radiator cap or fuel cap ? never used $14 Vanity mirror $12 mirror is a little fussy NOS AC 86S spark plug and box $20 all + shipping Screw on Aluminum hub cap 2 3/8" dia threads $15 will sell separately . Email me if interested bwbugay@aol.com