-
Posts
13 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by jcape
-
-
-
Kornkurt,
I've serched for 6 volt and can't find anything, all kinds of 12 volt. The heaters on ebay all require tapping into the cooling system, which I don't want to do on a car this old.
-
Tinindian,
Is the bottom open to the manifold? I can't tell from the pictures.
-
-
Thanks, I found KM Life Style before, but, no sender for the 1926 Oakland.
-
Does anyone know of a supplier for the sender/fuel pickup for a 1926 Oakland with the Telegage fuel gage?
-
I have a 1926 Oakland 6-54C Landau Sedan. I have rebuilt the engine and had all the water passages in the block and head cleaned. I have had the radiator cleaned out by a radiator shop and the water pump checked by two restoration shops. The engine continues to over heat. I got a digital infrared thermometer and in the garage it will maintain 160 - 170 as long as I rev the engine. Took it out today and drove about 5 miles with 5 people in the car and climbed a few small hills and it overheated. Any ideas?
-
-
Give Wayne Koffel a call, he's the expert on Oaklands and has a treasure trove of parts including engines. (610)217-5862
-
Does anyone have any information on overhauling an Oakland 6-54C engine, bore, crank journal sizes, torque specs, valve dimension etc?
-
I followed your link, they don't list anything for Oaklands except manuals.
-
Does anyone know where I can find parts for a 1926 Oakland model 54 engine? I need gaskets, wrist pin keeper screws.
1926 Oakland Transmission
in Automobiles and Parts - Buy/Sell
Posted · Edited by jcape
clarification. (see edit history)
I am looking for a speedometer drive pinion and shaft assembly for my 1926 Oakland. It is item number 28 center figure at the top of the page on the attachment.