Robert Bryan
-
Posts
89 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Robert Bryan
-
-
I'd be happy to help you with this . Just contact me
- 1
-
You have a wiper arm that has an adaptor for Anco or the Universal Brand blades that you have in the Photo . My advice is remove the adaptor and use trico wiper blades . The 1934 Packard 1104 used a 7 1/4" blades for convertibles and a 8 1/4" blades for closed cars .
-Bob
-
I am looking for a Zenith ignition parts catalog or an interchange book to identify a large group of Zenith ignition parts from the late 1920's through the early 1950's.
you can contact me at 407-865-4851. Ask for Bob
-
Lot of 220 NORS Glo-Brite and Lynx-Eye Lenses .All are in original Boxes . Nice opportunity for someone to take to a Swap Meet . See list below . $400 or best offer. Parts are in St.Louis ,Mo. Ask for Kevin 573-305-3640or you can call Bob at 407-865-4851T-325 CHEV 1933-36 LENS 821937 FORD 10 LENS1031 1966 CHEV CAPRICE RH 81028 1966 CHEVROLET RH 6770 STOP AND TAIL 1961-62 TEMPEST EX WAGON 7568 STOP AND TAIL PONTIAC 1959 EX BONNEVILLE 10730 STOP AND TAIL FORD PASS. 1960 202201 STOP AND TAIL FORD GALAXIE 1963 EX 500 62204 STOP AND TAIL WITH BACK UP 1964 FORD GALAXIE Except 500 AND 500 XL 32200 STOP AND TAIL 1963 FORD GALAXIE EX 500 8732 STOP AND TAIL FORD PASS AND STA WAGON EX FALCON 21734 STOP RED LEN ONLY FORD PASS AND STA WAGON EX FALCON 1961 17738 STOP AND TAIL FORD PASS ALL GALAXIE 1962 192212 1969 FORD STA WAGON RH 2752 STOP AND TAIL BUICK 1961 LH 1753 STOP AND TAIL BUICK 1961 RH 3
-
The correct original equipment wiper arm is a # 76570- 6 7/8" and a U-778-9" blade for all 1939 Hudson all closed cars . For Convertibles the correct original equipment wiper arm is a # 76570- 6 "
and a U-778-7 1/4" blade. You can also use the AL-11C adjustable length wiper arm as well . If you need any other help with wipers , just contact me . I've been working with vintage wipers for 40 years .
-Bob
-
Lot of 220 NORS Glo-Brite and Lynx-Eye Lenses .See list below . $400 or best offer . Parts are in St.Louis , Mo. Ask for Kevin 573-305-3640 or you can call Bob at 407-865-4851
T-325 CHEV 1933-36 LENS 821937 FORD 10 LENS1031 1966 CHEV CAPRICE RH 81028 1966 CHEVROLET RH 6770 STOP AND TAIL 1961-62 TEMPEST EX WAGON 7568 STOP AND TAIL PONTIAC 1959 EX BONNEVILLE 10730 STOP AND TAIL FORD PASS. 1960 202201 STOP AND TAIL FORD GALAXIE 1963 EX 500 62204 STOP AND TAIL WITH BACK UP 1964 FORD GALAXIE Except 500 AND 500 XL 32200 STOP AND TAIL 1963 FORD GALAXIE EX 500 8732 STOP AND TAIL FORD PASS AND STA WAGON EX FALCON 21734 STOP RED LEN ONLY FORD PASS AND STA WAGON EX FALCON 1961 17738 STOP AND TAIL FORD PASS ALL GALAXIE 1962 192212 1969 FORD STA WAGON RH 2752 STOP AND TAIL BUICK 1961 LH 1753 STOP AND TAIL BUICK 1961 RH 3 -
-
Those pieces are called Knurled drivers. I have them if you still need them .
-Bob
-
To clarify , I have the Original Trico blades in 6 1/2"
-
Thats a Trico P-1221 Saddle Wiper Arm. The blade looks like a Anco replacement . If the size blade that you need is 6 1/2" , then I do have those available .
-
Thats different than what my Trico books call for . Do you have the Original arms on the car or the Replacement Saddle arms. I do have 6 1/2" blades but i need to verify your arm type
-
My books say that a model B uses a 8 1/4" blade . the arm is supposed to be a wire arm with with a hook at the end . Not sure about the folding windshield part . If you have the original arm and your blades are 8 1/4" , then I can help .
-Bob
-
That car uses an 8 1/4" blade
-
What vehicle do you have ?
-
-
Sorry no Headlight Lenses
-
I have a nice Group of NOS 1946 to 1969 Buick Lenses . Genuine Delco Guide . Too many to list . I got these from a United Motor Service warehouse 40 years ago . Prices start at $20 and up .
Ask for Bob 407-865-4851. Orlando ,Florida
- 1
-
NOS Trico Wiper Blades & Arms . For Most American Cars 1929 - 1970’s . $10 and up . If anyone needs information as to what is correct for their car or truck, I'd be happy to help with the correct part numbers and info . Call 407- 865 - 4851 . Ask for Bob . Orlando , Florida
-
Any word on Where the the BCA 2025 Meet is going to be held?
-
Hello . I could help you with Arms and Blades on an original setup . But not on a Modified setup . The arm that you have in the Photo are definitely SWF arms and I don't have any of those . I have blades that would work that arm which attaches with a cotter pin . You might want to consider a modern arm that street rodders use with their electric motors . see photo below.
- 1
-
Can you Take a photo of where the wiper blade attaches to the Wiper arm ? I probably have some blades to fit it . I just need to see the connection.
-Bob
-
Oh , It looks like someone put a Bosch Electric Wiper motor on there . A Trico vacuum motor would have been original to the car . Does the Motor work? and Is it a Tandem Setup where the motor drives both the passenger and drivers side wipers? The Wiper arm pictured looks like a modified arm from an early VW. It really depends what you want to do . Stay with Electric or go back to Vacuum . and if you want to just have a wiper on the driver's side .
-Bob
-
I assume you have a model 65 or 75 closed car .If so ,your wiper motor should have a hole in it at the end of the shaft . It will accept a wire arm there .The Trico part Number is #8113 - 7 5/8" .
The blade is a #U-778-8 1/4". Your vehicle could have just a single wiper on the drivers side or could have been equipped with the passenger side as well. Below is a photo of a typical setup .
Hope this helps
-Bob
- 1
-
Try Ron Monte in Caldwell ,New Jersey
-
Vacuum wiper question
in Buick - Post War
Posted
you have remove the wiper arms from the car and the Cam Shoes can be easily replaced on the wiper arm
-Bob