Jump to content

Dean3326

Members
 View Profile  See their activity

  • Posts

    34

  • Joined

  • Last visited

 Content Type 

Posts posted by Dean3326

    1925 Franklin Series 11 Sedan

    in Automobiles and Parts - Buy/Sell

    Posted

    On 9/28/2019 at 8:13 AM, Brooklyn Beer said:

    Nice view of the attempted frame correcting cable. It is missing a couple important components though to give a little lift tot he sag. If I had more experience with Franklin's I would take it on but right now still sorting through my first one.

     

    Actually I have the Drawings right from Franklin,drawn in 1929 and they were followed to the T

    Willys paint formulas

    in Technical

    Posted

    Getting ready to restore a 1938 Willys will be doing a 2 tone paint having trouble finding paint codes and formulas from 1942 Paint brochure the color choices are

    Bedford Grey  ditzler IM -2373     QDE-1861

    Mediator Blue ditzler   IM-2609   QDE-2189

    I have seen these colors also described as Regina Grey  Willys grey

    Willy's rolls royce blue

    Could anyone help with the color formulas ?

    1938 Willys Overland Paint

    in General Discussion

    Posted

    Getting ready to restore a 1938 Willys will be doing a 2 tone paint having trouble finding paint codes and formulas from 1942 Paint brochure the color choices are

    Bedford Grey  ditzler IM -2373     QDE-1861

    Mediator Blue ditzler   IM-2609   QDE-2189

    I have seen these colors also described as Regina Grey  Willys grey

    Willy's rolls royce blue

    Could anyone help with the color formulas ?

     

    1927 Gardner throw out bearing

    in Parts Wanted

    Posted

    I need a throw out bearing for a 1927 Gardner model 8B  imperial sedan  with a Borg & Beck clutch. 1926 and1927 specs show they are the same size  3.0 OD  1.75 Id  .62 thickness   as described in the instruction manual  it was made of a special Graphite composition. I understand the Auburn is very similar to the Gardner.  Any help is appreciated. Thank you

    Dean

    1927 Gardner

    in Automobiles and Parts - Buy/Sell

    Posted

    Need a left rear axle for 1927 Gardner   8BS42915  lycoming engine 4HM12298 

    Shaft is 32.25 long  6 splines length 2.31  OD 1.44  end thread 1.0   V200 cast into housing  Columbia  stamped on axle shaft

    Also need the left inner bearing  Bock # 03520   and seals

    I understand Auburn   Cord similar parts

    Call with any information  484-553-2042  Dean

     
    •  

    1927 Gardner Imperial Sedan

    in Parts Wanted

    Posted

    Need a left rear axle for 1927 Gardner   8BS42915  lycoming engine 4HM12298 

    Shaft is 32.25 long  6 splines length 2.31  OD 1.44  end thread 1.0   V200 cast into housing  Columbia  stamped on axle shaft

    Also need the left inner bearing  Bock # 03520   and seals

    I understand Auburn   Cord similar parts

    Call with any information  484-553-2042  Dean

    1925 11A Parts wanted

    in Franklin

    Posted

    Looking for the floor brace between toe boards and floor boards.  R811  drawing # 33507 Toe board Bar

    Need the door glass regulator lift channel for a front door

    Windshield rubber seal mounted into the frame on the vehicle

    1925 series 11A

    in Franklin

    Posted

    I'm looking for a source for the Door side and upper channels. What is an acceptable replacement for these channels.

    Also looking for the Window regulator rubber compression lip for all 6 door channels. need 1 window channel with the lip to attach the compression lip.

    This vehicle has frame sag,I have the Franklin prints to attach the steel cable and turn buckle to remove the sag,has anyone had any luck with this setup?

    Thank you

    Upper Body Dimensions

    in General Discussion

    Posted

    Hello.  Restoring a 1969 Camaro Convertible   I need the upper body dimensions. Does anyone have access to this information or know where I can get this information. I have tried the major collision dimension companies no luck. Hoping someone either has this info already or knows where I can turn to.

    Thank you

    1926 Franklin spark plugs

    in Franklin

    Posted

     

    Spark plugs ?    1926 franklin model 11A   engine E103545  can anyone tell me the type of spark plug that should be in this vehicle.  It now has autolite 3095   with a reducer  going from the 1/2 pipe thread of the spark plug to 3/4 pipe screwed into the head. Problem being the od of that reducer barely screws into the head maybe on 3 threads. so something is obviously wrong. What is the original spark plug and what is its thread dimensions.

    Also a source for technical information    what should compression be?

    Thank you

    1926 Franklin

    in Technical

    Posted

    Spark plugs ?    1926 franklin model 11A   engine E103545  can anyone tell me the type of spark plug that should be in this vehicle.  It now has autolite 3095   with a reducer  going from the 1/2 pipe thread of the spark plug to 3/4 pipe screwed into the head. Problem being the od of that reducer barely screws into the head maybe on 3 threads. so something is obviously wrong. What is the original spark plug and what is its thread dimensions.

    Thank you

×
×
  • Create New...