TailfinEra
-
Posts
62 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by TailfinEra
-
-
Hello all,
I am currently searching for a pair of tag light bezels for a 1957 Lincoln Premiere rear license plate. Any help or leads is much appreciated.
Thank you,
Josh
-
Hello all,
I am on the hunt for a couple of dash knobs for a 1957 Pontiac Bonneville currently being restored. The ones I am look for are the knob with the button in the center for washer fluid and the other is what I believe is the fresh air vent knob/pull. It has a tab on the face and a long rod attached to it. I have attached a photo of the parts I am looking for. The photo attached has a number of parts in it, but I have outlined in red the two parts described. Any help or leads is greatly appreciated.
Thank you,
Josh
-
Hello all,
I am currently searching for a pair of tag light bezels for a 1957 Lincoln Premiere rear license plate. Any help or leads is much appreciated.
Thank you,
Josh
-
Found! Thank you everyone!
-
Hi Group,
I am in need of two gauge bezels to replace two that are beyond repair. I believe they are off of a '31 Chevrolet, but you may recognize them from a different car. Please let me know if you can help.
Thank you,
Josh
-
Hi Everyone,
I am currently in need of a RH reverse light housing for a 1956 Plymouth. I know there is currently a pair for sale on ebay, but I am hoping to find a better core. Please let me know if you might have one.
Thank you,
Josh
-
Hi Everyone,
I am currently in need of a RH reverse light housing for a 1956 Plymouth. I know there is currently a pair for sale on ebay, but I am hoping to find a better core. Please let me know if you might have one.
Thank you,
Josh
-
Found and purchased. Thanks everyone!
-
I am currently on the hunt for a taillight ring for a 1940 LaSalle 50 Series. 1939 LaSalle 50 Series and 1939-40 Cadillac 60 Series uses the same taillight ring as well. Please let me know if you might have one or know of someone who might have one for sale. All help is much appreciated.
Thank you,
Josh
-
Do you have any other 1958 pontiac parts? I am looking for the letter"c" on the trunklid of my Chieftain convertible.Part number is 529713 any help is appreciated thank you
Unfortunately I do not have any other '58 Pontiac parts.
-
Thanks for your quick reply. My email address is masjsb@gmail.com. My shipping address is Jon c/o Arne Jorgensen, 202 Butternut Drive, Strum, WI 54770. Please send an invoice including shipping cost to my mail address. I pay via PayPal as soon as I get information about your PayPal account. Thanks, Pontiac1958
Thanks for the info. I will box the parts up and find out what the shipping cost will be. Once I find out the shipping cost, I will make up an invoice and send it over to you. It will probably be tomorrow night before I have a total. Thank you, TailfinEra
-
Tailfinera.
I want to buy this parts. How can it be arranged. Can I use PayPal. Thanks. Pontiac1958
No problem. Send me a PM with your email address and we can swap information. PayPal works for me. Thanks, TailfinEra
-
By any chance do you also have the trim piece that bolts along the leading edge of the hood?
Sorry, but no I do not.
-
Up for sale is a set of side stainless for a '55 Oldsmobile Super 88 2-door hardtop. I don't know that much about Oldsmobiles, so it may fit other models. The trim I have drops down off of the quarter panels right behind the doors, goes back on the quarter panel, turns and goes up to the front fenders. I have both the driver side and passenger side. I am missing one of the small pieces that starts on the top of the quarter panel, I believe it is the passenger side one. Only other real flaw is the spot welds came loose were the trim comes to a point on the drivers side. All in all, the stainless is in great shape and would polish up nicely. Asking $125.00 for all of it with buyer paying shipping. Inquire if you would like to see pictures of it. Thanks for looking!
-
Okay, new plan of attack. Anyone willing to come pick up the fenders can have them. I don't want to haul them off...they are too nice not to be used. I will gladly give them to a good home, anyone whom might be able to use them on a project of theirs. Act fast, I have this listed on another forum as well.
-
Up for sale is a chrome bezel cluster and aluminum facia's for a 1958 Pontiac. All parts are in good shape with the usual amount of wear and tear. The chrome on the surround is decent, might clean up nice, but a re-chrome would make it excellent. Asking $50 for the whole mess of parts. Let me know if you have any questions. Buyer pays shipping. Thanks for looking!
-
I will take any reasonable offer for these fenders. I am moving at the end of the month and they are not coming with me.
-
Forgot to mention. I also have voltage regulator (not sure if it is good), one front parking light bezel base (just the round part that the lens attaches to and it has a repairable crack), and a pair of front parking light lenses (like new).
-
They are yours. Just pm me your details and I will get a shipping total for you.
-
Time to pay it forward. I have box of 1958 Buick parts that are free to a good home. All you have to do is pay the shipping. Here is roughly what I have:
-Pair of headlight rings (one with a small crack, easily repairable)
-2 stainless trim side shovels
-Part of windshield wiper motor
-Set of hubcaps
-Couple pieces of taillight trim
-Pair of taillight housings (not the large chrome surrounds, just the parts that house the bulbs that the lens screws too)
-Horn ring
-Hood emblem
-Parts of factory jack
-Part of factory radio
So that is pretty much what is in there.
Feel free to ask any questions. Thanks for looking!
-
[TABLE=class: tborder, width: 100%, align: center]
<tbody>[TR]
[TD=class: alt1, bgcolor: #F2F2F2]Up for sale is a nice pair of 1955 Buick Special front fenders. They have been in my attic for the past six years and inside for twelve years. They are nice and straight with one small spot on the drivers side fender. I have included a picture of it and it would be easy to repair. Other than that, they are a great pair of fenders. They both have the stainless trim and I have the headlight buckets and rings too. The rings are terribly pitted, but important pieces are there. They are missing the portholes and parking lights. Please let me know if you have any questions. Prefer buyer to pick them up, but if someone wants them shipped, I will at buyers expense. Thanks for looking!
[/TD]
[/TR]
</tbody>[/TABLE]
-
The big party is tomorrow. Sure hope some of you can make it. It is from 4-8pm at our facility. Please let me know if you have any questions.
-
Just wanted to remind everyone of the event again. It is less than a week away now. Hope some of you are able to make it.
Thanks!
-
I just wanted to cordially invite anyone on here that lives in and around the Nashville area and beyond to attend our 50th anniversary party coming up next week. As of May 1st Advanced Plating in Nashville, Tennessee turned 50 year old. To mark such a momentous occasion, we are throwing a 50th Anniversary party on Thursday May 17th, 2012 from 4-8pm. This party will also be a kick-off party for the Goodguy's Nashville Nationals happening that weekend. The flyer below details all of the important info regarding the shindig. We would love for you to come by and help us celebrate. Even if you live in the area, you are into cars, and don't plan on going to the Goodguy's event, you are still more than welcome to attend. Even though this is in conjunction with the Goodguy's event, this is still a party for anyone who's into cars, and loves chrome. Everyone is invited to come by, enjoy some Tennessee BBQ on us, take a tour of our facilities, and enjoy some excellent live entertainment. Please let me know if you have any questions regarding the event. We look forward to seeing you there!
WTB - 1957 Pontiac dash knobs
in Pontiac & Oakland
Posted
Hello all,
I am on the hunt for a couple of dash knobs for a 1957 Pontiac Bonneville currently being restored. The ones I am look for are the knob with the button in the center for washer fluid and the other is what I believe is the fresh air vent knob/pull. It has a tab on the face and a long rod attached to it. I have attached a photo of the parts I am looking for. The photo attached has a number of parts in it, but I have outlined in red the two parts described. Any help or leads is greatly appreciated.
Thank you,
Josh