TailfinEra
-
Posts
62 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by TailfinEra
-
-
I have a 1968 Cadillac Deville convertible I am currently working on and it needs the RH front brake caliper replaced. Problem is, I can't find anyone who has one in stock. I have tried all of the major parts stores and have been looking at collector parts businesses too. Anybody have an idea of somewhere that might have one? I do have a CARDONE number for it. It should be CARDONE 18-4049. Any help is greatly appreciated.
Thanks!
Josh
-
Still looking for leads on this.
Thank you.
-
On 9/4/2022 at 5:43 PM, cpwalter said:
I think I have one if you haven’t found one.
I still have not found one. Please let me know if you are able to help. If possible, please message me a photo.
Thank you!
-
Still looking...
-
Hello,
I am currently searching for a glove box door with trim for a 1938 Dodge passenger car. If you have one or know someone who does, please let me know.
Thank you,
Josh
-
-
Hello,
I am on the hunt for a pair of seat belts like the ones seen in the attached picture. I believe them to have been in a late '50's Cadillac. If anyone has any additional information on these particular seat belts, please share. All help is much appreicated.
Thank you,
Josh Mishler
-
Thank you everyone for the responses. This has been very helpful. As always, I greatly appreciate the advice from my fellow AACA members.
Thank you,
Josh
-
Hello,
We are currently restoring a Fiat Jolly and we are looking for someone who does wicker weaving. Does anybody have someone they would recommend? Your help is greatly appreicated.
Thank you,
Josh
-
11 hours ago, jpage said:
Donald Kuehn use to make them and the last number I have for him is 973-423-1196, but not sure if it's current. Very nice product.
Thank you so much for the lead. I will reach out to him and see if he can help.
Josh
-
Hello,
I am currently in search of sill plates for a 1938 Dodge four door sedan. I am looking for a nice set or would love a set of reproductions if someone makes them. Any help is greatly appreciated.
Thank you,
Josh
-
On 2/18/2021 at 3:49 PM, TerryB said:
It is an original and it is available.
I will take it! PM me how you would like to be paid.
Thank you,
Josh
-
Is this bulletin still available? If so, is it original or a reprint?
Thanks!
-
Hello,
I am currently in search of a nice pair of rocker moldings for a 1957 Pontiac Safari wagon. Please let me know if you have a pair for sale or know of someone who might have a pair.
Thank you,
Josh
-
Hello,
I have a collection of 1957-58 Cadillac Brougham parts that I am looking to sell as one lot. If I do not have any takers of it as one lot, I may consider breaking up and selling parts separately. However, for now, they are being listed as a lot. All parts are used originals that are in fairly decent shape to start with. All parts would need to be redone to be considered concours though. Some may be driver quality, but I see them all more as good original cores. Pictures of the parts can be viewed in the DropBox link below. The parts are located in Portland, Tennessee, just 45 minutes north of Nashville at the Kentucky border off of I-65. I will also be able to put parts on a pallet and ship them via a freight company, if that is needed too. As you would guess, the buyer will be responsible for shipping charges too.
https://www.dropbox.com/sh/mkpb9t1ooi8knnr/AADADMx2fvN05DCNwl7CMp0Na?dl=0
Please review the images and let me know if you have any questions. I am asking $12,500 for everything.
Thank you,
Josh Mishler
-
I have a '57 Chrysler 300-C hardtop for sale. It needs restoration, not running or drivable, but is mostly complete. Missing carbs, air cleaners, and 150mph speedo...and part of the front bumper. Do have a 120 speedo if wanted. Highly optioned with factory a/c...even have the clear tubes that come out of the rear deck to blow air forward. Car is located in Kansas. I am second owner. Have title and original owners certificate from Chrysler. Minimal rust. Little in the toe board of driver side floor and bubbling in rear of rockers. Very solid and very complete. Original engine, but some amateur the previous owner had restoring the car stamped the vin number on the engine block thinking that made it "numbers matching." Easily correctable. The short block has been rebuilt prior to my ownership. I have images taken through the hole for the spark plug and you can see top of piston, which looks new and has lettering on it. Although not visible in these images, have all the trim, grille, brake ducts, lower sheet metal for around air ducts and grille. Asking $14,500 or best offer. I live in Tennessee and have not relocated the car to my current location, so more images upon request, but may take a day or two to get. Private message me with any questions.
-
Thanks for the input. I will give that a try.
-
Hello,
I am currently searching for the small finned rectangle trim panels that would be on the quarter panel of a 1964 Ford Fairlane 500 Sport Coupe. There are two per side and they set right next to the faux scoop on the quarter as well. I have attached an image (swiped from the net) for reference of what I am searching for. Please let me know if you have some available.
Thank you,
Josh
-
Hello All,
I am on the hunt for part I am missing. It is the trim strip that goes on the top bow, just above the rear window on a 1964 Triumph Herald. This piece is curved to the contour of the bow and fits on the exterior of the top. Each end comes to a point and is held on by a screw on each end. Any help you can provide in locating one would be much appreciated.
Thank you,
Josh
-
Thank you all for the help. I think I finally got it finished up last night based on the advice I received in this thread. I greatly appreciate it.
-
Hi everyone,
I am new to having a space at the Hershey swap meet and I am trying to obtain a Pennsylvania Tax ID number. I went on line and found form PA-100 which I started filling out. However, it sure seems like there are a lot of questions that I don't understand or know the answer for. So my first question would be, as an individual, is the PA-100 form the correct form? If so, the questions about enterprises, do you just list your name for all questions related? Just trying to figure it all out. I would imagine that there are a few of you on here who have been through this before. Any help is much appreciated.
Thank you,
Josh
-
Thank you for the reply Steve. Is PO BOX 305, HERSHEY, PA 17033-0305 still the correct address?
Thank you,
Josh
-
Hi Group,
A friend of mine is wanting to transfer his swap spaces at Hershey to me and I am going to take them over and pay for them. He did this with some other spaces he had years ago and when he did so, he wrote a letter explaining this and had it notarized. At the time, the contact with the AACA to notify of the transfer was Robert Macadam. Is this still the contact? Or is there a new contact? If so, who do we need to contact? I greatly appreciate everyone's help and look forward to more years of fun at Hershey.
Thank you,
Josh Mishler
-
if you look in Smoke Signals mag. there are all kinds of vendors, it is just a pontiac mag. or hemmings.
Thanks Gary I appreciate the lead.
WTB: 1938 Dodge Sedan Dash Center Emblem
in Chrysler Automobiles and Parts - Buy/Sell
Posted
Hello,
I am currently on the hunt for the small winged emblem that goes on the center plate on a 1938 Dodge Sedan. I have the plate, but the small emblem is missing. Any help is greatly appreciated.
Thank you,
Josh