Jump to content

plt341

Members
  • Posts

    10
  • Joined

  • Last visited

Posts posted by plt341

  1. I am in the process of replacing the side sills of a model u sedan.Each side sill is made up of 4 pieces eace 7/8 of an inch thick for a total thickness of 1-3/4 inches. replacement can be made with a 1 inch and a 3/4 inch piece,1 inch piece must go on bottom.the width at widest point is about 9-1/2 inches.each sill half is made up of 2 pieces (4 total for each sill) joined/glued with a tongue and groove joint.I think the total length is 61 inches.

  2. I would love to see a photo of your side sills.I am in the process of making new ones for my 1929 u.A previous owner cut about 1/2 of the driver side out and screwed and nailed plywood in. the pass. side has rotted out where the cowl and side sill cover meet(I assume there is A notch there)I have been looking for A detailed photo for a while there is not much out there though.

×
×
  • Create New...