[1927 Buick Window Crank and Door Handle removal]

there should be a small hole in the base to put a hook pin in and push the release button 

 

 

 

 

 

[32 Buick pin striping]

[32 Buick pin striping]

[32 Buick pin striping]

yes it was under a repaint ,about 40 years ago i carefully removed a layer of paint to see the pin stripping .the car is a 32 57S maglauglin buick made in regina canada .i will take a few pics of the stripping on the that i did on the car ,i did want to duplicate it exactly but just was unsucsesful  so i did a single wider single instead of a double that way i could tape and air brush a stripe at a time ,pics to follow ,thanks Bob for all you do for the 32 buick community .........

 

[32 Buick pin striping]

these are pics of old pics mine had a double stripe at the top and bottom of the top door crown ,when they turn to go up the pillar two turns into one witch makes two above the doors.the guys that did this were very skilled i think that was all they did .

[Lift Points for Buick 320 Engine? Advice Needed]

Every time I did I just put two slings one front one back ,6 ft I think.

[1932 Buick Clock Alternatives]

I sure would like the winding and setting parts,just has not been a priority .

[1932 trunk install]

Sorry for time it to for me to get back.  I had holes in the trunk bottom that lined up with the rack spacing ,found a rubber mount at princess auto (Canada).

[1932 Buick water pump question]

if the packing has not been turned give it a turn, or replace the packing,do not be anal they do always leak a bit'

[Front End Friday Photo]

[Mounting tires on 1930 wire wheels]

If the paint chips it is to thick,just assemble and touch up.

[1934 Buick Body & Paint Numbers]

yes the original paint would be lacquer,so good paint thinner will soften it up all other paints will wrinkle.i would carefully remove layers of paint to find the stock color ,and match that, colors in those years are simple for a paint store to match.see if you can find a spot 3x3 inch and polish it up ,between the fender and the body maybe.

[1932 trunk install]

Thanks i was looking for shoe polish in the house last night,found some .Yes very happy with the trunk look, thought the back looked bare without it,nice when it just falls in your lap thanks.

[1932 trunk install]

Well it stopped raining,so here is a pic,i like it.

[1932 trunk install]

Thanks for your kind words,love you pics will post one with the trunk on, if it ever stops raining .ya nothing like going down a bucket list,did the fast sports car sold that,keeping the harley for a while .dont go in the ground with unfinished dreams.thanks,ya i like the trunk look on the car ,it will stay,it did come with a trunk rack.

[1932 trunk install]

cant see the rack holding water there is like 30 holes in it,but could flip it back over if need be .the trunk and rack are the same size just dose not fit inside.the lid when open is not at all close to the body so that is no problem,an it is easier to fuel than with the rack in the other position .think it looks good anyway if not will sell and move on ,just always wanted one,got a lot of things on my bucket list.a least it will be one less.

[1932 trunk install]

i got lucky a found a trunk for my 57s,have flipped the rack upside down ,bow to the back,do u just put some oak slats under the rack to attach ?

[Favorite Pictures of My Pre War Buick]

Here is mine

[For sale 63 VW rag top]

hello,can you send pics,price.i am in canada.raykoreman@shaw.ca    

[1931 model 8 66 torque ball leak]

I went looking through my old parts i found a interesting piece that might solve my problem,

[1931 model 8 66 torque ball leak]

There should be a leather cover over the ball to catch the oil,mine leaks about a once after it is parked after a hour of driving,just add more,thicker the better.i think they always will leak,have seen pics of really nice one with spill trays under them.

[1932 Series 50 - Just pulled engine - WOW!]

a long time ago.i did mine,first undo the rear shakle and slide torque tube back and off to side,then drop trany,next seperate bellhosing in the car,now moter can exit,put back in get moter close to fire wall and put bell housing back back on from inside car.or take out the stearing box.

[32 50 SERIES SEAT MOUNT BOLTS]

mine was 5/16 hex,and buy the patina i would say org

[WTB 1934 Buick trunk]

i also have been looking,there is one on ebay ,search 31 buick,but needs a lot of work.need to see more pics.

[WTB 1932 Buick hood hinge strap]

i saw one on this guys table next time i go back will try to buy.not sure 50 or 60