17caddyman
-
Posts
16 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 17caddyman
-
-
hi there all,
working on 1978 magnum and need some parts to finish the job.
Steering wheel-black
Rear bumper guard rubber cushions
Passenger seat lower base plastic cover RH side-black
Rear glass inner lower corner trim LT side
Rear inside dome light lens x2
trunk magnum emblemthanks for reading this. bobby
-
I have a buddy that is replacing body panels and some frame work. he needs the body measurements like the door opening and front frame to fenders and grill. he has the doors on it but it does not seem to be correct. I have been working with him but i'm not good at body stuff. is there any books or paper work that I can get for the specs. I have searched on the net and called a few dealers plus some shops but no luck. it seems that bmw really don't have any records of this type of job. I know these cars are hand built. there had to be something they had to go by. please help.
-
just to let everyone to know about what happened to the car. it was stored in storage bin. yes it was stormed over. no the pictures are not photoshopped. had the real papers to the car from the state. but because the state could not get funding for the project we had to box up the parts we took off and they put it back into storage for future restoration.
-
i'm looking for the front nose clip assembly.
-
i'm restoring a 1968 galaxie 500 convertible. where on earth can you find the front door armrest and vent crank. i have checked e-bay, googled, restore parts venders and junk yards. For some reason that this door is really special. the armrest is a 3 screw hole. first to second is 6 inches. first to third is 14 inches. i never had the old ones so i have no idea what the cushion looks like. also i have 1 vent crank but need another. this one looks like the window crank but halve the size with the cut out. im really sure there is someone out there knows if its possible to find them or i might have to use something else. thanks for reading this.
-
i replaced front fenders and hood on a 58 corvette. the holes for the side spears
are there so installing them was no problem. but there was not any holes for the flag emblems. the old fenders were damaged so could not locate holes for measurement. i have been searching and have not find on the 58. need info please so i can finish my project.
-
while doing restoration work on a 1968 plymouth gtx,i purchased a master cylinder and booster assembly from jims auto parts.
bad mistake. the booster will not release vacuum and because i contacted jims auto parts after 30 days of purchase,they were glad to be off the hook and not even interested in how one of their rebuilt boosters was not working.
i recommend purchasing mopar parts anywhere but jims auto parts.
so anyone has an idea of what im missing or do i need buy another booster from someone else. thanks bobby
-
i have a 68 plymouth gtx with out ac. im installing the oem ac system plus under dash case. have a template to cut the holes in firewall. im looking for the oem hose set off the compressor. it can be used but it has to have good ends. i will be replacing the rubber hoses. thanks for reading this. bobby
-
i get to restore the general's staff parade car. was in a flood at a storage room. ill keep everyone up dated as i go. bobby
-
1
-
-
i did a heavy search on the net and found alot of info of the car and who had it plus who rode in it. its John Pershing, General of the Armies staff car. he was given this car to drive around louisiana bases and parades.
-
where can i find a hand pump. have the old one but found no rod or the valve in it. might make one with a rod and 2 washers with leather sandwiched between it. tube looks good just need cleaning. thanks bobby
-
thank you jim. called them and they can do the job. great site
-
i have old water damaged-corroded gauges on my 1917 cadillac. like to know where can i get some replacements or someone that can try to make them look good again.
-
mr Layden B thank you for the pictures. its the correct ones i need. this site is the greatest. i need to get some pictures up for you to see what im working on. thanks again bobby
-
hi there folks, im starting to restore a 1917 M-57 staff car. i have alittle history of the car but im looking for some real info of the car and maybe some manuals or detail of the assembly. i want to make it as close as the car looked like in that year. the car is all there but rusting away so im removing the body and made a body support table. ign switch looks dull but have someone that can polish it up. wiring will be my next problem. cant find a diagram od where the wires are hooked to. i have been net searching plus called a few people on old cars. no luck. i will post a picture soon so you can see the project im working on. any ideas or anyone has some old stuff want to sell that would be great. thanks for reading this. happy motoring bobby
looking for odd mopar parts
in Chrysler Automobiles and Parts - Buy/Sell
Posted
thanks I will check it out.