billstewart
-
Posts
199 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by billstewart
-
-
$5A rebuild roadster make into a pick-up new , paint , new uph. ,running gear redone,run good. in batesville ar., $6800
-
for sale a 1923 willy overland model 91 three door sedan. all bad wood replaced running gear redone new spokes in wheels new uph. and paint , runs good.call 870 698 4997 before 8 p.m. . $9800
-
Hi all, I got the old Willy finish, now I have to sell it .,if you are interested in it call 870 698 4997 before 8 p.m. I can email pictures, Bill
-
Hi, make sure you don't mix the water glass with antifreeze
On 10/19/2016 at 2:24 AM, DCE said:Quote from above:"I know what my father in law would have done. He would have added 'rad weld' or 'Bars leaks' to the coolant and stopped up any leaks from inside. The problem with that stuff is it can block up your radiator and that is something I am not prepared to risk."Hello Ray,I was advised by a technician/mechanic who worked in the Harrah's restoration shop for many years that they would always by pass the radiator during the process of using a block sealer. He also indicated that sodium silicate provided excellent results.As well, youtube has some wonderful video on metal stitching. Searching "lock n stitch" on youtube will list a number of very informative videos. Best of luck on your repair.DCE -
Jan, a guy in ohio had a good one he'd had for years and he sold it to me for $50. it runs good now, I'm going to put it up for sale in couple of weeks, Bill
-
When I did the 25 I used to have I put the motor and tran together and put it in that way. It was just the bare fame when I done it.
-
Boy, you are real good at woodworking
-
COOL! Here's how that exhaust pipe hanger will fit that rubber-damped bracket on the frame that was an earlier mystery.
Hi ,where did you to?Bll
-
Hello Bill! I never give up looking. I found one for myself and if I knew anyone who does sandcasting we could have a few made. I am posting photos of what you are looking for.
I found one ,against-all odds I found one . it is in Ohio. Thanks everybody for helping me look both here and on the willy overland forum.
, Bill
-
It is a auto-lite distributoranybody know where I can found a distributor mounting flange for 1924 willy overland? it is a auto-lite distributor. thanks Bill email billstewart1942@yahoo.com -
Yeah Bill, that is just what I need. I was going to drive it for the first time and it back fired and died. Then I found the flange broke off right below the distributor.If you found one let me know, I found a dist. cap and rotor , Bill
-
Hi Bill, do you know where I can get a distributor mounting flange for the old willy ? I looked all over ebay with noluck, it is a auto-lite distributor, thanks bill Stewart
-
anybody know where I can found a distributor mounting flange for 1924 willy overland? it is a auto-lite distributor. thanks Bill email billstewart1942@yahoo.com
-
I use paste wax,it make the screw go in good.
-
I got mine off by putting a hose clamp on tight and then tapping on the screw. I used wd 40 first
-
Tom, I can't get gmail to work, but I
need a distributor cap and rotor for a 1923 willy overland. it has a no. 57 in the cap. thanks Bill
-
-
-
-
that's not bad looking truck, I have redone a lot worse. Just take it easy and make sure you do it right.
-
I don't see a gas tank
-
It looks like it would be easy to restore. hope you get it, it will make a fine car ,you will get alot of satisfaction out of restoring it.
-
aw shucks Cahartley, it was a enjoyable car to work on, thanks
-
Bill, the body on the 23 was wood with medal nailed on it, it was pine too boot .the wood was hard to make , not much pattern to go by. Luckily I have friend who is real good with wood work, later Bill
1925 Reo Sedan $3500.00
in Automobiles and Parts - Buy/Sell
Posted
where is car located ?