cpwalter Posted November 19, 2014 Share Posted November 19, 2014 I am installing a OD cable into a 38 Dodge. My question is where does the lower bracket on the cable attach to? There is a bracket that attaches to the dash and then there is another bracket lower on the cable that attaches to something for added support. Appreciate your input. Thanks. :confused: Link to comment Share on other sites More sharing options...
Guest bishopt Posted November 27, 2014 Share Posted November 27, 2014 I installed an overdrive in my 37 Dodge and I faced the same issue. I made a bracket from flat stock and bolted it to the cross member, then using a wire cable lock I secured the barrel of the lockout cable to the flat stock.Tim Link to comment Share on other sites More sharing options...
cpwalter Posted November 28, 2014 Author Share Posted November 28, 2014 Thanks for responding. I have the original bracket that came with the cable. I am trying to find out where it was connected to the frame, transmission, or wherever. I know there are numerous members of this forum that have 37 and 38 and probably 39 Chrysler's and De Soto's that came with Overdrives from the factory. I need one of them to respond with where their bracket is positioned to support the lower end of the overdrive cable. I thought it would be easy but so far no responses other than yours which I appreciate. Maybe something will turn up soon.[ATTACH=CONFIG]283116[/ATTACH]I installed an overdrive in my 37 Dodge and I faced the same issue. I made a bracket from flat stock and bolted it to the cross member, then using a wire cable lock I secured the barrel of the lockout cable to the flat stock.Tim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now