charlooze44 Posted September 8 Share Posted September 8 Hi, I have an issue with my wipers, it only works on speed 2. Nothing happends when speed 1 is selected. Washer is functional. I remove the button from the dash, and found 2 things that hurts my understanding : 1) On the back of the button there is 3 wires, and the electrical continuity is like this : Wipers OFF : continuity between ground and output 1. All other no continuity. Wipers position 1 : Continuity between ground and output 1. All other no continuity. Wipers position 2 : Continuity between ground and output 2. All other no continuity. Washer ON : Continuity on output 3. => I'm surprised that there is continuity between ground and output 1 while the wipers are off. Is that normal ? 2) I have no potential between ground on the car and output 2 and 3. that looks correct to me. But I do have 12V between Ground on the car and output 1. => How is that possible ? Any idea what could be wrong ? Bonus questions : How to remove the wiper arm ? Is there a stetting for the arms to cover more or less of the windshield ? At full speed the arms will collide with the chrome on the windscreen, especially on drive side. Thanks you very much, and greetings from France Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now