Guest Posted November 11, 2002 Share Posted November 11, 2002 Charlie, could you please view my post "Sequential Tail Lites" below and see if I did anything wrongly (next to last entry)? Thanks much for you time.curt Link to comment Share on other sites More sharing options...
Charlie B. Posted November 11, 2002 Share Posted November 11, 2002 Curtis, I can't find your previous post, I did have some help in installing thesequential lites, G.M. Ross also has them and he did it recently, Maybe he can help. Charlie B. Link to comment Share on other sites More sharing options...
Guest Posted November 11, 2002 Share Posted November 11, 2002 Charlie, here's the Link to your original post. My wiring post is the next to the last.thanks much,curt Link to comment Share on other sites More sharing options...
Guest Greg Ross Posted November 12, 2002 Share Posted November 12, 2002 Curt,Went and had a look at your "Post";I disposed of the directions after I installed mine about a month ago, as I recall the only thing that confused me was the item in the instruction about running signal feeds back from the Signal Light Switch????I can only suggest you Un-Do what you've done temporarily matching colors and prove the signals are working Ok.Now disconnect all the connections you cut originally, you'll need a volt meter, test the wire you are taking as the "Signal Wire" With the Negative of the meter grounded you should get the intermittant/ signal light power on one of those wires. That's your Signal Wire for the Module. Connect the Gnd. and signal connections back to the Module and you should then be able to check the other output wires from the Module same as above. It should be downhill from there. Link to comment Share on other sites More sharing options...
Charlie B. Posted November 12, 2002 Share Posted November 12, 2002 Curtis; I can't remember exactly what I did . I do know that I did not go anywhere near the signal lite switch. Just stayed at the rear of the car and did all the splices there. Only my tail lites sequence. If I were you I would follow G.M. Ross suggestions. Good luck. They really are nice. Charlie B. Link to comment Share on other sites More sharing options...
Guest Posted November 12, 2002 Share Posted November 12, 2002 Thanks Charlie and Greg, I appreciate your help. I'll get a tester and play with it this weekend, again. I didn't use the long wire to the front as I don't mind the brakes cycling once before staying lit. Thanks again,curt Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now