1927/28 Dodge Brothers series 128/129 Tourer
Hi,
I thought I'd add some photos showing progress of my Dodge Tourer restoration. When I started the restoration I found that there is plenty of knowledge and helpful people around but not a lot of information on line so I thought that this could help others doing any work on a similar model.
I purchased the car in December 2015, it was running (but only just) and over the course of the next year I sorted out some of the basics (brakes, carb, charging etc) so I could get it re
Differential rebuild. All parts ready to go
Differential pinion assembled with new bearings and modern neoprene seal 45mm x 85mm x 10 (CA-3221942R1). Front nut tightened to remove free play then ~1 additional flat to provide pre-load.
Modified inner seal holders to take modern neoprene seals (instead of felt) using the original housing with an aluminium adaptor. Used 1.43" x 2.06" x 0.31" seal
Modified the outer seal/bearing holder to take
