1937 Buick Model 48: RESTORATION HAS BEGUN! (Photo)
1937 Buick Model "48" (Two-Door "trunkback" Sedan)
A Step - By - Step "Frame - Off" Restoration Thread
Wednesday January 11, 2017:
Today is the day the restoration starts. The Holidays are over, the tree cleaned up and my buddy Mike has graciously offered his vacant garage to store my Model "A" Fords for three months. This allows the Buick to take most of the garage, and puts me on an aggressive timeline so I'm not paying for monthly storage. So, with
Wednesday October 3, 2018: Interior Panels
Part 2: Finishing the door skin
I'm setting all those wire clips under the door skin and snapping the panel over the door. This was a pain! The panel has about 16 holes drilled in it under the fabric.
NOT ONE of those holes lined up with the holes in the door! Not one. So, hours of carefully elongating some panel holes, and straight up drilling a few new holes in the door,
I was able to get the panel set nic
