skycar Posted June 6, 2016 Share Posted June 6, 2016 Hi to all here, can you please tell me where on the Big 6 engine is there provision for the crankcase breather/ ventilation. My Big 6 leaks oil badly, there is more oil under it than in it. Slight exaggeration, but not far from the truth. I have found that at the front and back of the engine, where #1 and # 6 cylinder walls meet the cast section for the valve adjustments and cover plates, there is a slot that is sealed with (probably asbestos) material/ gasket and held in place with a metal strip. This seems to act like a sponge and draw oil (probably with the aid of crankcase compression) and seep out like a slow eruption from a volcano. Is this area designed to help vent the build up of bypass compression? I want to seal it up to stop the oil leaks but don't want to inhibit any gas build up/venting, will this create a bigger monster? I see on the RHS of the engine between 2 of the cylinders there is a 1/2 inch hole (approax) which appears to be a crude method of venting? Any thoughts would be helpful, thanks .........Roger Brisbane, Australia Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now