Guest Posted January 11, 2001 Share Posted January 11, 2001 I HAVE A 215 ALUMINUM MOTOR WITH BELLHOUSING,CLUTCH FORK,PRESSURE PLATE,FLYWHEEL AND CLUTCH ALL STILL ON THE MOTOR,WILL A 4SP MUNCIE BOLT UP TO MY BELLHOUSING? Link to comment Share on other sites More sharing options...
Guest Posted January 11, 2001 Share Posted January 11, 2001 these bell-housings came both ways.If you take the 3 spd off and there is another set of transmission mountng holes.you are lucky.The wider set is for the 4 speed,not all that many came that way, Ralph Crisp BCA 2399 Link to comment Share on other sites More sharing options...
Guest Posted January 12, 2001 Share Posted January 12, 2001 so if my bellhousing is the wider one,a muncie will bolt up to it? Link to comment Share on other sites More sharing options...
Guest Posted January 13, 2001 Share Posted January 13, 2001 Most 215 bell housings had 4 bolt-holes to for the large bolts to hold the transmission,but some had 8 holes .These came on cars which had 4 speed as factory equipment.A few showed up on 3 speed equipped cars.If you happened to get one of these,you really lucked out Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now