Guest Richard D Posted May 22, 2009 Share Posted May 22, 2009 I started to replace my horn buttons today, I got a T-27 size driver to remove the air bag module. I was able to remove two of the screws on one side but when I tried the other side the carbide T-27 driver stripped both screws. It is not the easiest thing to put pressure on the driver by pulling on it while turning it. Now what can I do? Drill out the screws? try one of those easy out sets they have been showing on infomercials? HELP!Richard Link to comment Share on other sites More sharing options...
Guest Bugler Posted May 22, 2009 Share Posted May 22, 2009 It's a t30. I just did it. Try that size and see if it can catch. It's a tight squeeze. I wouldn't know what else to tell you. Link to comment Share on other sites More sharing options...
Guest Richard D Posted May 22, 2009 Share Posted May 22, 2009 Thank's I will give it a try, I hope I did not mess up the screw heads too badly.Richard Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now