want: 4 barrel intake manifold and a carb

[Guest]

I need a 4 barrel intake manifold and a carborador for a 1967 Buick Skylark 300. If you have any information regarding these parts, please email me at "ladon@texas.net". Thank you.<BR> <BR> -LaDon<p>[This message has been edited by Jacob (edited 08-03-2000).]

[Guest]

I have stripped and clean Al. 4 barl.manifold as used onthe 64and 65 300 engines. $95 shippedups. rob 503-227-3892.

[Guest John Chapman]

Jacob,<P>The only 300 4 bbl manifold that will fit is the '65 cast iron (one year of manufacture). The aluminum 300 manifold was '64 only and requires the aluminum heads to work properly. You can find the 300 4 bbl on Special/Skylark/LeSabre 300 engines. Casting number for the cast iron 4 bbl is: 1366695<P>For more detail, I invite your attention to: <BR> <A HREF="http://www.aaca.org/ubb/Forum5/HTML/000077.html" TARGET=_blank>http://www.aaca.org/ubb/Forum5/HTML/000077.html</A> <BR> <A HREF="http://www.aaca.org/ubb/Forum5/HTML/000111.html" TARGET=_blank>http://www.aaca.org/ubb/Forum5/HTML/000111.html</A> <P><BR>Cheers,<BR>John<P><BR>------------------<BR>John Chapman<BR>BCA 35894<BR> jmchapman@aol.com <P>[This message has been edited by John Chapman (edited 08-03-2000).]<p>[This message has been edited by John Chapman (edited 08-03-2000).]

[Guest]

Thanks John for the info on my manifold! <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Jacob:<BR><B>I need a 4 barrel intake manifold and a carborador for a 1967 Buick Skylark 300. If you have any information regarding these parts, please email me at "jacobo_g@yahoo.com". Thank you.<BR> <BR> -Jacob</B><HR></BLOCKQUOTE><P>

[Guest]

Call this # 512-303-0833 and speak with Mark, I recently sold him two '65 4bl setups and he does buy and sell and use '64 to '67 Skylark parts. He drives a '64 Skylark and has maybe 10 parts cars '64-'67's, and is active in visiting Central Texas salvage yards. He's also BCA member.