4t1pack
-
Posts
22 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 4t1pack
-
-
Napa 25-11430
-
The 37 godess is one peice plus the base.41's are three peices head,body & glass wing + base. G
-
There are supports that go on the cross members on your shields and bolt to the bumper bolts.
Greg
-
I have 2 retainers.
-
Check your vacuum advance. Greg
-
-
-
PM sent. 4t1pack
-
Sounds like your main shaft going through the clutch is binding on the pilot bearing. Good luck.
-
I have one out of a 1941, will that do? Saltydog
-
Black
-
1935Packard, Service letter dated 9-15-41.
sent you a PM. Saltydog
-
As I said befor it's your windshild wiper motor. Refer to page 35 in the electrical section of the service letters. Saltydog
-
If your noise sounds like a telegraph, you should look to your windsheld wiper motor. Try truning it on and off when you hear the noise.
Saltydog
-
Sounds like a bad ball bearing in your cross shaft roller. Do you have much free play? Greg
-
A 35-38 jr. topshifter will work but you will have to fabricate new shifting forks.
-
With the car on the ground and in gear,depress the clutch stand on the break and try to start.
Greg
-
Depending on the condition of your old parts you can replace the ss rod.
Greg
-
Thanks for the tip RO.
-
Anybody know where I can find an Orpin series parallel switch?
-
Check the shear pin onthe pump gear.
Reproduction Trunk Rack Emblem?
in Packard
Posted
julrickpackard.com