[Hupmobil 29 engine]

On 12/8/2023 at 11:39 AM, Fordy said:

Talk to someone in the Hupp club or contact the Hupmobile Register in Australia. You probably need to look at the serial number on the side of the engine - the letter prefix will tell you the model - in this case I suspect it is series A.

Olsens gaskets in the US can do gasket sets, I believe distributor caps and points are available and people in the relevant clubs have reproduced some parts for these.

My car that uses that engine has a vacuum fuel system and not a pump. I think someone has reproduced water pump impellers.

Steve

thanks Fordy, it was a good help. Im talking with olsens gaskets and i will get one of their products. 

[Suspesion question]

14 hours ago, Barney Eaton said:

You need to unbolt the strips that attach it on both ends.   

They are rusty and may break but you need to eventually replace them when you install replacement 

strap.   I do not know if someone sells the replacement strap but have heard of owners using strips 

from a conveyor belt. 

Thanks for the info, it certainly doesn't seem complicated but I saw it as very tense and I was wondering if removing the straps would make it difficult for me to put the lever that comes from that "shock absorber" back into place.

[Suspesion question]

⁰Hi everybody, i gould like to change that old strap and i see is really tensed. If i cut will be easy to conect again or there is a system for do it?

 

Thanks 

[Hupmobil 29 engine]

Hi every body, im Ruben from spain and im restorating a pontiac 33 that it comes with a hupmobil engine. The engine runs but i would like to change some parts like water pump or fuel pump. where i can get does pieces and some books about this engine??

 

best regards and thanks in advance

 

ruben

[Pontiac touring 1933]

looks like mine that engine Bloo. thanks for the info i was finding some books from pontiacs engines and now i will change on Hupmobile Century Six. 

 

Here there is more pictures from it.

 

Another question, where i can find the "chasis number" i see the engine number on the cilinder section but the car not.

[Pontiac touring 1933]

this is a picture that i get and looks same like mine

[Welcome Pontiac Flathead Fans]

thanks to create this forum, Im Ruben from Spain and there is not info about thoes cars here. Im happy now and my 1933 too

[Pontiac touring 1933]

Thanks, and the engine looks also 33? i see the carburator in down position

[Fuel Pump]

Hi roscoe, sorry im not writing for your fuel pump, but i dont know if my engine car is from 1928 or late. Can you show me a picture from your engine?? there is not a place to buy new parts like that??

thanks in advance

 

ruben

[Pontiac touring 1933]

Hi everybody my name is Ruben and im from Mallorca - Spain. I just get a pontiac that the papers sais is from 1928 but all the pictures that i see looks like from 1933. Is more or less dificult to get info in europe, and in spain imposible. I entry in google unknown and i see you forum.

 

I show you a picture from the car and a video where i run the engine. the car was 40 years in a garage stoped.

 

https://www.instagram.com/p/CqV5LfBILQI/

 

Can you tell me where i can get info about this engine? i need to start buying parts like waterpump, or petrolpump, exhaust, etc and i need to know the model, year, etc. Thank in advance. Also where do you buy parts??

 

Thanks again

 

Best regards

 

ruben