-
Posts
19 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Stude_Opel
-
-
Soda blasting is good for aluminium.
-
Hello all Studebaker experts!
Is chassis, fuel tank and springs painted by gloss- or semi gloss paint?
-
-
-
Hi get caps and said they looked good. He send pictures to me today or tomorrow. Thank you for helping!
-
On 7/18/2022 at 1:41 AM, oldford said:
I may have some interior handles you can use. I have attached a photo showing 1 interior window crank with a crack see photo. Maybe it can be used as a pattern. Shown are also interior escutcheons that were extras when I had my ES President, along with door knobs and oval rings. Interior door lock handles also. Not sure if you can use them, but for $50 for all, plus shipping I can send them too you. I also have rather nice pair of headlights from the ES and fans. Used front wheel bearings that are usable if you need them.
Frank
Hi Frank
I need lockin levers (center right) and door opening knob (top left). I have one window crank for pattern. But i can take all these parts, price is good.
I have good headlights and new front wheel bearings.
Please send PM for me
-
On 7/24/2022 at 5:58 AM, 13Caddy2 said:
Are you still needing the wheel caps--2 correct ?--tell me how to ship, that you can afford--we can go from there--the paper work the post office wanted was more than i wanted to do---Tom
yes, i send PM
-
20 hours ago, nzcarnerd said:
He may have intended to put 1927? The Model EW Big Six Commander uses the same engine as the ES Big Six President.
Yes, it's true. My new piston set is almost here, i paid customs yesterday.
- 1
-
Thanks rbk, bud Commander pistons don't fit to big six engine. I ordered new 0.030 oversitze piston set and complete valve set from Egge.
Your door lock knobs and window cranks look a bit different. Thanks anyway!
-
Don't worry, i can make new knobs, if uoy can't find them.
I still need hubcaps too.
-
On 12/22/2021 at 3:24 AM, rbk said:
Sorry to see that you had so few responses.
I belief that our Covid lockdown and the Christmas season with it's cold weather has something to do with this.I know that FINLAND get cold also.
I may be able to help you with some parts but I shut down for the winter because it cost more to heat my warehouse than I sell on parts.
Rest assured that somewhere you can find the parts you need and people will get answers for your questions .
It looks like you instrument cluster is complete ,Why are you looking for another one?
The door opening knobs have been reproduced and I have a pair but they have not been plated yet.
I have a engine core that need rebuilding from a model EW that is as far as I know the same engine.
The Big six engine parts maybe hard to find but I know several Studebaker owners that frequent these pages have rebuilt these engines and can give you advice.
Have a Wonderfull Christmas and when it warms up in the spring give me a reminder.
Robert Kapteyn
studebaker (at)mac.com
Replace the (at)with @
eight one 5 212 2389
Did you found any parts?
-
On 12/25/2021 at 6:18 AM, 13CADDY said:
I found 2 3in. caps that I"LL part with--if you still need pm me--$75 for the pair, i'll need to research the freight---Tom
Yes, i still need caps. I try to send PM, but it doesn't work. I received an error message "Your account does not yet meet the minimum content requirements to send personal messages". I don't know why. Can you send PM for me please.
-
Yes, here is cold and dark. Not very cold, but VERY dark.
The door opening knobs sounds good! If i don't find good window cranks, i make new ones. Orginal zink cast parts is wery poor condition but here is brass founder, who can make casting works for me. https://iloinenvaskiseppa.com/
I dont need whole instrument cluster, only green face plate. (Fifth picture). I bought a new fuel gauge body from straight-eight.com, clock is ok, but i bought it to watchmaker for cleaning and oiling. The rest of the gauges i fixed myself.
Let's see in the spring, what parts you can find.
Merry Christmas and happy new year for all!
-
Thread diameter is 3 inches
-
Hello all
I started new project, Studebaker President ES sedan 1927. Car imported to Hanko Finland in february 1927 and was sold in March to taxi driver Guy Augustsson. Importer was Korpivaara & Halla (Toyota Finland today) and price was 120000 fmk. T- Ford tuoring paid 27400 fmk at the same time. Guy drive by Studebaker to year 1954, but car is out of use 1940 -1947 because of the war. In the sixties he sold car to young man, who started the restoration, but only dismantled the car. I bought this Studebaker April 2021. It was stil on parts, but i found almost all.
I need some parts for my car, can anybody help me?
- Instrument cluster with six holes (see picture)
-Door opening knobs and window regulators (picture)
-Ball & Ball SV33 float chamber lid (picture)
-Stop lamp glass lens (lamp with "Studebaker Stop" script)
-Grease hub caps (pictures)
-Six 0,020' (or larger) oversitze pistons and rings
-New crankshaft main bearrings
-Front bumber (Biflex)
- 2
-
On 7/8/2021 at 2:45 PM, Riv_fanatics said:
Hyvää, where did u get the parts for restoring it?
Regards to Suomi
Thanks, i get parts all ower the world. From Finland new engine and front suspension parts, some used body parts. From Sweden nos chrome mouldings, used body parts etc, lot of parts from Germany (eBay.de and www.matz-autoteile.de). Even Turkey became some parts.
Car was very poor condition when i bought it. Here is some pictures.
Terveisiä Suomesta! (Regards from Finland)
- 8
-
-
Hello all! I have early Studebaker ES President 7 passenger sedan (1926). This is unrestored project, disassembled in the 60's. Engine color is silver grey with black distributor, weaterpump, starter, generator and valve cover. I think this is orginal colour. Is this possible?
Front brake shoes for 1927 President
in Studebaker, Erskine & Rockne
Posted
Hello
I need help again. I need better front brake shoes for 1927 President ES. Three of four front brake shoes is poor condition, i have only one useable. Brake shoes is made of cast aluminium. Shoe is about 15" long, wide is 2 3/8".