-
Posts
35 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Servin
-
-
Thanks Huge,
Your great help I’m sure a lot of us would be lost if it wasn’t for you! I’ll be sending you a direct message later today or tomorrow about some other things I need advice on with some photos attached.
- 1
-
Hello I’m trying to find someone parting out or have parts for a 1926-27 Buick Standard. I need a few parts and having trouble find i need the gas pedal… passenger door hinge…. a square metal piece for the passenger door post…light lenses for my front cowl and rear light system if you have any leads or have parts message me thank you for reading.
-
On 9/1/2021 at 4:09 PM, Hubert_25-25 said:
Servin,
This is what the distributor hold down screw looks like. I made the barrel from a piece of tubing and I silver soldered a washer to it. I made 4 at the time. There is a picture showing the washer and bolt that I used to hold the 2 pieces as I soldered it.
I don't know what a "radiator bypass block off" is. You will need to provide a picture.
Bob's has the accelerator button that screws on the end of the accelerator rod. Bob's has the dash plate for the choke.
I do not know what "suspension straps" look like, so another picture would be helpful.
Hugh
Hugh,
I’ll be sending you a few photos of the straps I was talking about and the block off through a message thank you for reaching out.
-
Hello guys I own a 1926 Buick standard I put up a post on wanted parts but didn’t get much help so I put it in this topic. I’m looking for the passenger door window and door mechanisms..window frame that goes on the door four pieces…I need a radiator bypass block off…this screw that goes in the back of the distributor …accelerator pedal seems like you can screw it on and off….and suspension straps left and right…if possible the choke bezel that goes on the dash. If you have any leads please message me thank you stopping by hope to hear from someone.
- 1
-
Hello guys hopefully you guys can help me with finding these parts for my buick I need the passenger door mechanical devices to roll up the window and to open the door from the inside also the window frame you’ll see in the photo that the passenger door inside is empty so you have an idea for what I need the other shows the window frame from the driver side that I need for the passenger hopefully I hear from someone and make some business thanks a lot for reading!
-
-
Hey guys I got some nice Ford rims. I’m 100% sure they for model T but maybe can fit other 20s or 30s Ford but I’m not sure 5 lug I’m asking 300$ for all 5 I know the photo has four but I got the spare all matching same spoke design just needs a touch up but great condition! Just send a message and we could talk business thanks for looking!
-
-
7 hours ago, Oregon Desert model 45 said:
I want to give you a heads up on something you will eventually run into while working on this car. Components supplied by Delco often used fasteners with nonstandard thread pitches which can be difficult to find now. That special bolt has 10-30 threads on my 1925 Buick. Starters, generators, combination light/ignition switches all had nonstandard fasteners. I don't recall running into that problem anywhere else on the car. I usually clean up fasteners and tapped holes with tap & die and learned to check thread pitch before chasing old threads. Nonstandard taps & dies can be ordered online for this purpose and I had to buy several while working on Delco parts.
Kevin
Thanks for the heads up man appreciate it
-
Hey guys so I’m trying to figure what’s what under the hood and I noticed a couple thing maybe you guys can clarify some stuff so I there’s this metal rod type thing wanted to make sure if I connected where it should be and why my honey comb radiator has an extra open port of some sort I seen in other photos online that it connects to on top of the motor maybe for water circulation but my motor doesn’t have that type of opening took some photos hope you can help thanks! First photo is the rod seem like a hook and behind the distributor looked like that’s where it went correct me if I’m wrong
2nd photo is the motor
3rd is the radiator port that goes somewhere or gets blocked off? I have the thermostat housing on top of the radiator so that’s what’s confusing me
4th is where I connected the rod
-
Hey guys so I’m trying to figure what’s what under the hood and I noticed a couple thing maybe you guys can clarify some stuff so I there’s this metal rod type thing wanted to make sure if I connected where it should be and why my honey comb radiator has an extra open port of some sort I seen in other photos online that it connects to on top of the motor maybe for water circulation but my motor doesn’t have that type of opening took some photos hope you can help thanks! First photo is the rod seem like a hook and behind the distributor looked like that’s where it went correct me if I’m wrong
2nd photo is the motor
3rd is the radiator opening that goes somewhere or gets blocked off
4th is where I connected the rod
-
4 hours ago, viv w said:
Hi Servin,
A nice project, and finding parts will keep you busy.
Looking at your pictures, going from left to right is , clutch pedal , brake pedal, accelerator rod(missing its pedal), foot rest (to stop your foot bouncing on the accelerator on bumpy roads) and the starter pedal. Your dashpanel I'm pretty sure, has been modified with later guages, look for another dash with correct guages.
I recommend you join the Buick club for help with parts and advice and keep searching this forum and ebay for missing parts.
This picture below is from a previous post on AACA forums, showing a 1926? Buick dash
Good luck with your project.
Viv
Thanks sir for reaching out and for the help took another look at the dash is there a reason for the different design on mine and the one you showed me year wise? Dibarlaw post a photo of his 25 and looks similar to mine or I could convert dashes?
-
35 minutes ago, dibarlaw said:
Servin:
The photo of the pedals and dash show that this car had been in service for a long time.
The knob at the top of the patch plate is for your choke.
Photo of my 1925 Standard dash. The heat/choke plate was oval on the Standards. By 1926 they switched positions of the ignition switch and speedometer. Oil and Ammeter design was changed.
The reason your speedometer was changed.
Thanks for the info I took another look at the dash right now and seems like my gauges are backwards and a different design than the ones viv w showed me is there a reason why? Also there’s to little knobs one far to the right and one to the left of the steering wheel have an idea what they are? I took a better photo to show you.
-
3 hours ago, viv w said:
Hi Servin,
A nice project, and finding parts will keep you busy.
Looking at your pictures, going from left to right is , clutch pedal , brake pedal, accelerator rod(missing its pedal), foot rest (to stop your foot bouncing on the accelerator on bumpy roads) and the starter pedal. Your dashpanel I'm pretty sure, has been modified with later guages, look for another dash with correct guages.
I recommend you join the Buick club for help with parts and advice and keep searching this forum and ebay for missing parts.
This picture below is from a previous post on AACA forums, showing a 1926? Buick dash
Good luck with your project.
Viv
Thanks for the info! Yea I have to do some searching is the big lever the emergency brake? When I push the brake pedal and it’s super stiff but I’ll start breaking it down soon and will be posting more photo with questions
- 1
-
Hey guys,
so I finally got my Buick home and here it is. Also I’m looking for some parts so if you guys can help with leads or if you have parts feel free to reach out to me and maybe we can do some business thanks. So I have a few questions what is the clutch, gas pedal. I got the Buick from a family that’s owned it from the beginning and there’s something by the steering wheel looks like a cover don’t know what it is or something else supposed to be there you’ll see in the photos. Here’s some stuff I need passenger window and mechanical stuff for the window crank lock door handle that’s goes for all the other handles I need I also need a hood latch just one, the little lights outside I see some call them cow lights? Also head lights and the bezels. Steering wheel don’t know any craftsman near me but here you go check it out!
-
Hello sir can you give me a can when you can 9515306592
-
Thank you for the response and info I’ll be checking it out!
- 1
-
Hello guys I have a 1926 Buick standard and need help finding parts I need timing cover fan hub assembly and water pump I’m new to the site so I’m post everywhere to spark something up if you have any info or parts I would really appreciate it and hopefully we can do some business thanks for reading
-
Hello guys I have a 1926 Buick standard and need help finding parts I need timing cover fan hub assembly and water pump I’m new to the site so I’m post everywhere to spark something up if you have any info or parts I would really appreciate it and hopefully we can do some business thanks for reading
-
Hello guys I have a 1926 Buick standard and need help finding parts I need timing cover fan hub assembly and water pump I’m new to the site so I’m post everywhere to spark something up if you have any info or parts I would really appreciate it and hopefully we can do some business thanks for reading
-
-
Any parts still there need fan assembly
-
Hello sir do you still have parts for Buick I have a 1926 standard
-
Hello sir do you still have these parts
1927 Buick standard window frame
in Buick - Pre War
Posted · Edited by Servin (see edit history)
Hello gentlemen,
So I’ve been on a hunt and need help. I need the interior passenger window frames (4) and that’s it to complete my car hope someone has some spares or would know anyone that could help. Send a message or comment thanks for reading