[1960 Buick Heater Control Valve]

Thanks

not sure I need it I bought a new 2 chamber master cyl and booster

 

[What Years Buick Used Switch Under Accelerator Pedal]

Instead of using a button because I am rewiring the car and changing the carb couldn’t I reroute the carb switch wire to my new ignition that has the spring loaded start position on the ignition.

[59 wiring questions]

Anyone know how to convert pedal to starter conversion? I am installing new wiring and ignition. I put on a different intake set up with a 4 barrel carb and an 1 wire alternator. I know how to wire the starter. My guess it that the wire going to the original switch will now go to the ignition not totally sure. Can anyone help?

[1960 Buick Heater Control Valve]

Anyone know what this is I think it’s from my heater but not sure

[1960 Buick Heater Control Valve]

See my picture of the core with the valve attached? There are 2-3 different valve manufactures not all are rebuildable Fuscick Buick rebuilds them

[1960 Buick Heater Control Valve]

Found this but don’t have a clip

[1960 Buick Heater Control Valve]

Ok I got that it attaches to a clip but not having a clip or knowing where the clip goes it’s not much help. Se the picture of my core

[1960 Buick Heater Control Valve]

I also have a 1960 Buick I have an issue with my heater I had the valve rebuilt and the core but I still have issues it leaks from the rubber gasket between the valve and core. Everything is clean and new. I think the gaskets they now use are slightly smaller but I think the pressure is making some fluid still leak out. I may have to walk it on. Please help if you can.