Marcus Stephenson
-
Posts
23 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by Marcus Stephenson
-
-
19 hours ago, Joe Cocuzza said:
Send me your email address.
I have a couple of pics of the grille(s)
Joe
Hi Joe, email is : warbird1923@hotmail.com
Thank you
-
On 8/20/2018 at 8:39 PM, Joe Cocuzza said:
My friend has been very busy so he has not looked for the grille halves as of yet. (he is moving)
When he gets to them I will contact you.
Sorry for the delay
Joe
No Worries Joe, really appreciate the effort.
-
18 hours ago, Marcus Stephenson said:
Six
The car in the pic is a 1928 Studebaker President 8 State Sedan, engine is 337 Cu In Flat Eight, sorry , thought you were asking about the 47 Chrysler
-
4 hours ago, Steelbreeze said:
I do have an extra set. Not perfect but better than average for originals. I'll have to get by my warehouse and uncover them if you are interested. Aged pot metal doesn't handle the strip tank of s chrome plater very well. Especially if brittle
Hi Joe, would like to see the pictures as I am interested, the problem with mine regarding the plating process was that the firm tried to grind out the pits instead of filling and smoothing prior to the plating processes, felt like puking when I saw them .
-
8 hours ago, Parrish said:
Is that a 6 or an 8 under the hood?
Six
-
10 hours ago, Joe Cocuzza said:
He is going to look for them and send me some pictures. It may take a day or two
Thank you Joe
-
7 hours ago, Joe Cocuzza said:
The grille halves I have are rough.
I have a friend that may have a pair. I will ask him.
Joe
Thank you
-
-
Hello Joe,
In search of the two grille half's for my 47 Coupe, the chrome shop destroyed mine unfortunately.
Looking forward to your reply.
-
15 hours ago, Spinneyhill said:
Thanks for the Information
-
On 9/9/2017 at 1:34 PM, nzcarnerd said:
It is an FB President. The Standard Catalog says they built 13,186 of them between June and October 1928. Serial numbers start at 7000001 and seeing this is number 177 the casting date of may 1928 sound right. The FB was the new for 1928 1/2 short wheelbase (121") version of the President and is the first model to have the bigger bore 337 cubic inch engine. As it is on wood wheels my guess is that it did not have sidemounts, but I notice it has a full width rear bumper so maybe it did have them. There is a pic of an FA wood wheel car with side mounts in the Crestline Studebaker book. The FB is the model that was used to set the speed records at the Atlantic City speedway in July 1928.
Hello, would you happen to know of a source to purchase "The Standard Catalog "
Looking forward to your reply
Regards
-
Thank for the contact
-
Hi. I see what you mean by limited interior parts $ 50.00 plus the ride for the cap
Thanks
-
Hi, whats the cost regarding the cap and woild you happen to have any interior parts at all .
Thanks
-
Hell, I am looking for the End caps ( hub caps )that you have on the rear end and front axle, the ones that have the S on them, how many would you have available . Looking forward
to hearing from you. Thank you
-
On 4/22/2018 at 9:12 PM, studeq said:
Correct for all 1936-40. Came in both chrome and painted.
Thank you for the picture and reply, Much appreciated.
-
In search for two 20" Artillery wheels ( wood for a 1928 President 8 ) Please contact me with what you may have or sources.
Thank you
-
Surplus to my needs, Radiator mascot, any interest , two feathers are missing, although easy to repair prior to re-chroming. What years of truck is the cap from , Thanks
-
Surplus to my needs, Radiator mascot, any interest , two feathers are missing, although easy to repair prior to re-chroming. What years of truck is the cap from , Thanks
-
I am in search of one tire fender mount casting ,( for the locking mount for the tire ) you can see the casting in the pictures. Also, I do need four door trim interior etched plates again seen in the pictures, the picture regarding the etching is a carriage and horses. Any help would be greatly appreciated.
Thank you
-
Greetings
I do have two pair of spare tire mounts that will be surplus to my project..One pair in good shape, needs re-plating. The next pair , someone has tried to repair the ears on one mount, but is easily repairable,,, the other one is good, and, I also have a one spare for the drivers side, if anyone is interested please contact me. Thanks
-
1
-
-
Hello , Interested in your pair of lights, could you please forward some pictures,
Thank you , Looking forward to your reply.
Cheers, Marcus
1927 STUDEBAKER FLYING LADY
in Automobiles and Parts - Buy/Sell
Posted
Joe Petrello , I have a Atlanta Flying Lady , that is an original ,,the end of the hand is missing, overall pretty good condition. I can take a series of pics for you, regarding price I really have no idea, I have been watching ebay for the last year and the pricing is all over the map, although that does not seem to be a determing factor for sales , only one has been reposted for sale twice. let me know, you can email me at warbird1923@hotmail.com
Regards, Marcus