19tdave
-
Posts
12 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 19tdave
-
-
Please let me know if anyone is bring 1929 Hudson parts to Hersey?
Let me know your location and cell if possible.
Thanks
Dave
-
On 8/1/2017 at 11:15 AM, keiser31 said:
Try George at Olcar Bearings.
Thank you for the help - I appreciate it as Geo. can fix me up - Also looking for 1929 Hudson parts if you have any leads.
Thanks and enjoy your summer.
Dave
-
Thank you for the information - I will contact him tomorrow - Have a wonderful evening
-
Looking to buy new old stock of Timken 315 tapered bearing and 312 cup for a outer wheel bearing on a 1929 Hudson
-
Hi All - yes I am also on the Hudson yahoo group for Hudson's.
Thanks - I have been in contact frequently with Carl and he has given me some contacts but not the correct parts available.
If I do not locate the correct fender in a few months then I will need to fabricate the right side fenders. My left sides fenders were in good shape however the rights seemed to have been in a demolition derby.
Thanks for all the suggestions.
Dave
-
Hi John, yes - these parts can be fabricated and that was my next shot if I can't turn up any of these items.
The right rear would be the easier than the front. The front is massive plus it has a well in it. and both have beaded and wire edges.The wire wheel hub caps could be CNC machined but maybe it would be easier just to see if a Franklin or Chrysler hub cap could be modified as they used the same wire wheel in 1929
These parts are around but the owners are passionately attached to them, which I don't blame them.
Again Thank you and have a wonderful evening.
Dave
-
John, thanks for the note and concern. Yes I am a member with the HET club and have posted with them.
Yes, I am aware of the scammers out there even within the clubs I belong to.
Restoring this car has been a challenge that is for sure.
Thank you
Dave
-
Parts needed to finish my 1929 Hudson 4-door standard sedan:
Right rear and right front fender w/well, Hub caps for wire wheels, right side front visor bracket, Right & left spare tire brace mounts that screw through the cowl into a bracket, spare tire wheel locks and would be interested in 1929 parts car. Please contact Dave Tatich, Phone 315-365-2630, email dtatich@rochester.rr.com
-
Hello Carl. I would be interested in these hub caps -please call me 315-365-2630 or email dtatich@rochester.rr.com
Thanks
Dave
-
Hi Carl, could you send me the approximate overall length of the cap from edge of the threaded area to the tip of the pointed top.
Thanks
Dave
dtatich@rochester.rr.com
-
Wanted 1929 Hudson 4 door sedan model R right front welled and right rear fender, complete hood wire wheel hubs and brakes. Interested in any 1929 Hudson parts, cars or leads - Thanks Dave contact dtatich@rochester.rr.com or 315-365-2630
1929 Hudson parts
in Hudson, Essex, & Terraplane
Posted
Hello, let me know if anyone is bring 1929 Hudson parts to Hersey?
Please let me know your location and cell if possible.
Thanks
Dave