[WTB good 320 head & 320 insert bearing rods]

On ‎3‎/‎21‎/‎2020 at 11:18 AM, B.Liesberg said:

I just need the head, my crank is good and I want to switch away from Babbitt bearings. 1938 would probably be a good candidate though, since I know it's the same variation of the 320 as mine.

Just checked my head number #1301411, $75 for just the head plus ship.

 

Also have a set of .60 over pistons with rings and pins, some used valves and springs etc.

[WTB good 320 head & 320 insert bearing rods]

12 hours ago, critterpainter said:

I have to ask the obvious question.   What year head do you need?  They are NOT all interchangeable if I recall. I believe the water outlet gasket is different on the 50-52 engines because the outlet is different and won't line up with a earlier engine.

1938

[WTB good 320 head & 320 insert bearing rods]

I have a 320 head, crankshaft and babit rods.   $200 in New Jersey

[38 Century Clutch fork Boot]

I have an original boot fabric. If you send me your address ill make a traced copy and send it to you.