30's Mopar
-
Posts
20 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 30's Mopar
-
-
I received this part from an old Mopar dealership. It was all 1930's parts. This appears to be a crankhole cover. This is for a pickup or truck?
Items appears to be stainless. Measurements are the following
ARC length = 5 3/4"
Width = 3/4 "
Edge Side = 5/8 "
Ear 1/2 " (U shape opposite of hole)
Picture is of inside. Will post other pictures by 4/22
Will split selling amount for proper ID. Mark Belec mark.belec@gmail.com 612 599 6512
-
On 1/28/2020 at 5:54 PM, m-mman said:
. . . . distinctive bumpers too
Family believes its a 29 Dodge, but that doesn't seem right.
I would be interested in these headlights. Mark Belec 612.599.6512 or mark.belec@gmail.com
-
I would be interested in the head lights. Mark Belec
612.599.6512 or mark.belec@gmail.com
-
PA or PB
-
On 4/12/2018 at 1:01 PM, Sactownog said:
do you have tail light license plate lens that fits inside the tail light assembly?
I have perfect reproductions in new resin if interested
-
1 minute ago, knobless said:
Thanks
Will trade towards any non mechanical parts for 32-36 Mopar
-
4 minutes ago, knobless said:
What’s the price on the screens,
125 for pair
-
21 hours ago, knobless said:
Any 34 Dodge, the bullet type tail lights?
Sorry none at this time. I have some NOS metal screens for the chrome horns and a glove box lid
-
I have 4 tail light license plate lenses left from original run
These are made with modern resin and is a perfect reproduction
$60 each plus 9.00 for shipping
Also have a few nice drivers side tailights
contact mark.belec@gmail.com
-
I have a NOS 38 Dodge temp guage. Assume you could swap faces
-
I had a small run of these made and have 4 left.
These are excellent reproductions made with modern resin and with all details.
If you are interested in these they are $60 per lens and 9.00 for shipping in US.
You can reply to mark.belec@gmail.com if interested.
I will try an attach a picture
-
Henry,
I would move the items to a neutral location and try and list these either on line or have an online auction. Everyone else will have to discount the price to buy the whole lot - you don't want to get screwed twice. Lawyers are usally not a good time.
-
Don makes these with lost wax method which keeps the detail. THe originals are potmetal and end up worst as potmetal is hard to chrome based on the pitting. Stick with the lost wax process and you will be happy and cheaper in the long run
-
There is a guy in Kansas City that may still have one. I thin it had the small door for the rumble seat. Let me try and locate my old business cards
-
THese are in production - should have in the next few weeks
-
This is the lense I would be reproducing.
-
I would like to purchase if you still have
-
I'm looking to have 33 and 34 Dodge Tailight License Plate Lenses made. THese would be high quality reproductions that match originals. They would be resin and not glass as cost is prohibited. Let me know if you are interested. The last original 33 lense I had went for $130 about 6 years ago - which is crazy. Assume price would be under $100
-
Its a dodge cab with a plymouth dash. Chrysler didnt make plymouth trucks until 1937
1936 - 1939 Dodge Plymouth Chrysler Desoto Crank hole Cover
in What is it?
Posted
Thanks - let me check