Jump to content

Terry M

Members
 View Profile  See their activity

  • Posts

    14

  • Joined

  • Last visited

 Content Type 

Posts posted by Terry M

    FS 1930 Ford Briggs Town Sedan project

    in Ford Automobiles and Parts - Buy/Sell

    Posted · Edited by Terry M (see edit history)

    On 12/28/2021 at 12:32 PM, Terry M said:

    30 Briggs T.S. 4 DR! Frame off restoration, New Schwalms engine w/ Bored manifold & Mod B carb, Snyder's 5.5 Head, Insert bearings , over size valves, lightened fly wheel (56 lbs).This engine was over $5,000. alone!  New PPG paint "The Drabs" Chicle Drab and Copra Drab, all  body work done. New Ash body wood. Sills, Body wood, Top wood, much of which is from Classic Wood in NC. (Almost $4,000.) Three Of the biggest tasks of a restoration are done! In addition, Front fenders are welled, It has hydraulic brakes. Rebuilt rear end. Front seat wood, springs, and  steel have been  restored. Seats need final upholstery, New wood frames for front and rear seat. New wood bows in place for top, just needs fabric! New windshield and quarter windows, Doors need glass, Regulators are there. New gutter channels, New rechromed rear bumpers.  RH Tail light, 1930 Pa License plate And more! 4 good matched tires, W/ five rims. I am selling because of health and age reasons. This has been a labor of love, Like to see it go to a good home! No flippers or hot rodders!  $ 9,750     Because of my computers age and updates, I can no longer post the latest pictures. I have photos that I can send upon request .   

    George M.        Cesspilo@yahoo.com         Quakertown, Pa area.

     

    FS 1995 9000, CSE

    in Swedish (Saab, Volvo)

    Posted · Edited by Terry M (see edit history)

    1995 Saab 9000 CSE  170 + miles, 5 spd, std shift.  Engine runs ok, Car did move until recently, Now the clutch pedal goes to the floor,  the car is complete. Alloy wheels.  Extra 5 spd trans and new clutch and some small parts. Body good, electric windows, leather seats.  asking $950.  OBO

    Terry      Cesspilo@yahoo.com      Quakertown PA area

    FS 1933 American Austin Coupe

    in Austin and Bantam

    Posted · Edited by Terry M (see edit history)

    This is the old condition "In a basket!"  Frame off partial restoration. The frame has been worked on and painted. The body has no dents  and very little rust, some of which I repaired  on the lower part.  Newly fabricated rear shelf. I made a new seat spring and the plywood base, I have the originals. The battery box has not been tampered with in any way (rare). New wood kit. 2 windshields frames. Doors (No dents or rust) No glass. Radiator and shell w/ Austin badge. Hood W/extra panels , 4 recently repaired fenders (2Fr. and 2 r, 2 extra front , 6 in all),    3 steering wheels (1 good), New lug nuts, all around. Engine has new valves all lapped and fitted. Many extra valves. Extra set of pistons. Bored intake manifold.  3 headlight buckets and light bar,  2 heads.    $3950.   I am selling because of age/health do not allow me to do this work any longer.

    George M     Cesspilo@yahoo.com        

    • Like 1

    FS 1930 Ford Briggs Town Sedan project

    in Ford Automobiles and Parts - Buy/Sell

    Posted · Edited by Terry M (see edit history)

    30 Briggs T.S. 4 DR! Frame off restoration, New Schwalms engine w/ Bored manifold & Mod B carb, Snyder's 5.5 Head, Insert bearings , over size valves, lightened fly wheel. New PPG paint "The Drabs" Chicle Drab and Copra Drab, all  body work done! New wood. New Ash body wood, sills, Body wood, Top wood, much of which is from Classic Wood in NC. Entire body has  been insulated. Three Of the biggest tasks of a restoration are done! In addition, Front fenders are welled, It has hydraulic brakes. Rebuilt rear end. Front seat wood and steel has been restored. Seats need final upholstery , New wood frame for bottom of rear seat . New wood bows in place for top, just needs fabric! New windshield and quarter windows, Doors need glass. New gutter channels, New rechromed rear bumpers  RH Tail light, 1930 Pa License plate And more! 4 good matched tires, W/ five rims. I am selling because of health and age reasons. This has been a labor of love, I'd Like to see it go to a good home! No flippers or hot rodders!  $ 9,750        ( Because of my computers age, I can no longer post the latest pictures. I have photos that I can send upon request )

    George M.        Cesspilo@yahoo.com         Quakertown, Pa area.

    Van Norman Mod F valve grinder

    in Parts For Sale

    Posted · Edited by Terry M (see edit history)

    I am selling my Van Norman valve grinder. Original brass tags/plates, all readable, Westinghouse motor. Will accomodate Ford mushroom valves. Original red paint, Everything works and is intact. Weight estimated about 80 lbs. Sorry, no pictures.  $225.  I will deliver up to 25 miles of Quakertown, Bucks Co, Pa.

    Terry

×
×
  • Create New...