6ball
-
Posts
18 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by 6ball
-
-
I saw a 61 chev front-end on a 67 cougar! The guy must have worked in a wrecking yard to come up with that.
-
Seriously, if anyone makes one ( inside or outside ), I want one.
-
Does anyone know if there is a louvered rear window shade made for the Reatta? I'm thinking that one for the inside would work best for this car.
Any ideas??????????????:confused:
-
ESTAVER: I am having the same problem with my wiring (including one of the power window wires). Your troubleshooting info is being very helpful.
Both power window wires broken (now spliced) Main power wire (orange/black) broken, too. In the process of splicing all of the wires to the seat switch just so I don't have to do this again (at least on this side).
Your info was right on. Thanks Update: 6 out of 8 wires to the switch were broken or hanging by a single wire. This must be the reason they relocated the switch in "90". THANKS AGAIN!!!!
-
I jusr did this with an 87 Cutlass Ciera with the 3.8. I just asked the parts guy if they had a belt for my car if not equipped with A/C. They had one. It works fine. It may work on the Reatta. It's at least worth a shot.
-
I have also used the type that runs off the car battery. It works great on lug nuts! I put one of the kits in my wife's trunk in case she has a flat. I even used it one time to remove a bumper in a wrecking yard. It actually broke 3 of the bumper to frame bolts on a 63 Nova!!!! But not enough torque for high torque apps.
-
Pretty much all the other V6s were designed as a V6 and were a 60 degree config. The 3.8 is still a 90 degree, and
I believe ( please correct me if I'm wrong )that the 3.8 GM
engine is the most extensively used engine in GM history,
dating back to rear wheel drive midsize cars and the Buick Grand National. I think it was still being used a couple of years ago.
-
3.8L GM V6s are what's known as an odd-fire V6 because it
uses a 90 degree design adapted from a V8. It has always had more vibration than a 60 degree design. Some drivers don't mind the extra vibes ( can tell when it's running),
and some don't. The damper was an attempt to appease those
drivers, I suspect.
-
I tried all the collector ins. companys, too. They all wanted your daily driver car/s to be newer than your collector car. Mine aren't new enough. I went with Safeco
and got a good discount for covering all my cars and the house, with my Reatta covered for 6K.
-
As a new member myself, I can say that I was very releived
and surprised to find a place like this where the people are so friendly AND helpful.I've learned a lot here already.
-
Does anyone know if you can put an aftermarket steering wheel on an 89 Reatta? I have a Grant banjo style with a walnut grip that would look great in my car ( it it fits )
-
The Reatta wheels I have seem to have a brushed finish on them. What I really wanted to know was if anyone has polished these kind, and how much of a pain was it? I do have other wheels that came polished and I'm not sure if they have a clear coat or not. They are a 3 spoke Weld wheel
16 X 8 that I have on my El Camino. Do they come with clear coat when new?
-
I've seen the other questions about wheels, but I have a question I did not see. Has anyone tried stripping off the clear and just polishing the wheels and not recoating??
-
I've tried all the major collector car insurers, including Grundy ( good quote ) BUT I keep having the same problem with all of them.... they want my daily driver cars to be newer than my Reatta. Mine are older and they will not insure me. Has anyone else run into this, and what did you do???
-
Salem,Oregon
-
Just bought an '89' Reatta and it has 16" Caddy STS wheels on it. They look OK, but I like the look of those Lucerne wheels a lot more!!!
-
rule of thumb on rack & pinion... Rebuilt racks use a steel sleeve after honing out the alumunum bore. They last much longer than original equipment.
Mid 80s corvette 7 speed OD
in Chevrolet & GMC - General
Posted
I bought this vette trans to replace my old, tired Saginaw. It came with the hyd clutch, bell housing, & the vette shifter. The problems are: the trans mount is on the side ( I'll probably have to build a bracket for that ), and I need a source for a shifter I can use on this trans in my 79 El Camino. The speedo is electronic, also.:confused:
DOES ANYONE HAVE ANY EXPERIENCE WITH THIS?