nevadaperf Posted June 1, 2007 Share Posted June 1, 2007 HELLO, PLEASE HELP.... WORKING ON 1951 PACKARD WITH OVERDRIVE MAIN 30AMP FUSE BLOWS FOR OVERDRIVE ANY HELP PLEASE... THANKS ANDY. Link to comment Share on other sites More sharing options...
Clipper47 Posted June 1, 2007 Share Posted June 1, 2007 If it blows the fuse immediately check the all the wiring and look for a bare wire touching the frame. It might be something else but I suspect a grounded wire. Link to comment Share on other sites More sharing options...
nevadaperf Posted June 1, 2007 Author Share Posted June 1, 2007 THANKS, DOES IT MATTER I JUST CHANGED TO 12VOLT AND DID NOT CHANGE THE RELAY? Link to comment Share on other sites More sharing options...
Clipper47 Posted June 1, 2007 Share Posted June 1, 2007 No need to yell (capital letters means yelling). Yes changing to 12 volt will affect the operation of the both the relay and the solenoid. Unless both are 12 volt also the system is not operational and may in fact be damaged. Link to comment Share on other sites More sharing options...
Guest BigKev Posted June 2, 2007 Share Posted June 2, 2007 He may have fried the solenoid in the engage position. This is common when running 12v thru a 6 volt one. That is why I changed the one on my starter. Link to comment Share on other sites More sharing options...
Guest 51Patty400 Posted June 6, 2007 Share Posted June 6, 2007 Did you change it to negative ground as well?- Mark Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now