37 Dodge 1/2 ton PU cab to frame mounting bolts?

[kevdiggins]

I have a 37 Dodge 1/2 ton PU that's missing (2) cab to frame mounting bolts (1) long and (1) short (with springs). Anyone have any extras? Also, are there rubber replacement cab mounting pads to replace the small blocks of wood I have there now?

Thanks,

-Kev

kevdiggins@hotmail.com

[Guest DodgeKCL]

Not sure about 1937 but in 1933 to '35 the wooden shims are factory installed. They are 1/2" thick and the parts manual says "Use as required".

[humpbacks]

Dodge City in Jamestown,Ca. Mike Northcutt has those cab mounting parts<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DodgeKCL</div><div class="ubbcode-body">Not sure about 1937 but in 1933 to '35 the wooden shims are factory installed. They are 1/2" thick and the parts manual says "Use as required". </div></div>

[humpbacks]

Dodge City can be found in Hemmings Motor News in print or online<div class="ubbcode-block"><div class="ubbcode-header">Originally Posted By: DodgeKCL</div><div class="ubbcode-body">Not sure about 1937 but in 1933 to '35 the wooden shims are factory installed. They are 1/2" thick and the parts manual says "Use as required". </div></div>