Guest inthespot Posted April 22, 2007 Share Posted April 22, 2007 Just say a post yesterday or the day before which had the numbers to order a replacement antenna mask but now it is gone. Did a search but can not find it anywhere. Help someone. Thanks Mike Link to comment Share on other sites More sharing options...
Roadster90 Posted April 22, 2007 Share Posted April 22, 2007 Write and ask Barney at barney@texas.net Link to comment Share on other sites More sharing options...
Jim Posted April 22, 2007 Share Posted April 22, 2007 Mike,I am not sure what an antenna "mask" is, <img src="http://forums.aaca.org/images/graemlins/smile.gif" alt="" /> but if you are looking for a replacement "mast" for your antenna from GM you get one from a Caprice and the part number is 22038195. This is just the top section and the band. To rebuild your antenna the motor needs to be good and the bottom two sections have to be good. The replacement piece you get from GM is now being made in China or someplace similar and Barney and I have discussed a couple of times that because they are cheaply made you will find where the nylon band is crimped to the top section they made it a little too big and will have to be recrimped or somehow made slightly smaller. Be careful though as the metal is very thin. Link to comment Share on other sites More sharing options...
Guest inthespot Posted April 23, 2007 Share Posted April 23, 2007 I knew that was not correct but just not think what it was, anyway, my center section is bad. I went through the car wash and forgot to put it down as I was using the XM and did not think about it. The motor and everything else is good but it bent the top over and got the section section. What now? Mike Link to comment Share on other sites More sharing options...
Jim Posted April 23, 2007 Share Posted April 23, 2007 If the bottom two sections are bent you will have to replace the whole assembly.I will send you an email.Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now