Riley77777 Posted November 26, 2006 Posted November 26, 2006 Is an O ring required in the filler tube for a 1954 hydramatic transmission?Thanks for your time.
Guest Joe_Varley Posted November 29, 2006 Posted November 29, 2006 That would be shown in the factory service manual trans section.
rocketraider Posted November 29, 2006 Posted November 29, 2006 I just looked thru my 54 CSM as well as a couple of HydraMatic-specific manuals I have, and I didn't find a drawing of pan and fill tube or a reference to an O-ring. The CSM is vague on the pan- only time I found it mentioned was in transmission removal "remove pan and filler tube". So I'm not really much help here.
Oldsfan Posted November 29, 2006 Posted November 29, 2006 I'll dig out my old parts book and look into this. I need to check something for Joe anyway...Paul
Oldsfan Posted November 30, 2006 Posted November 30, 2006 My '63 parts book list one filler pipe o-ring seal - for '56 Model O Hydramatics (2nd type). Same number is also used for '61 thru '63 F-85 Hydramatics. So it looks like your '54 doesn't use one.Paul
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now