Jump to content

Reatta on CRT


Recommended Posts

Guest grkman1
Posted

I was browsing Reatta's on Ebay this evening and came across Ebay #200047728792 , that shows a picture of the 88 CRT with the Logo Reatta from the CRT

I never saw this on my 88, Unless I can make it do that...Anyone know how?

Check out the attachment

Thanks

George

post-48343-143137914095_thumb.jpg

Guest F14CRAZY
Posted

It should happen whenever the driver's door close. The instrument panel also does its "light show" thing.

Guest mongeonman
Posted

i had the same problem,i fixed the switches that are inside the drivers door,one on the latch and the other on the outside door handle,i think they get tired and they break and fall in the door.

Guest grkman1
Posted

so to remedy this problem, there are switches that need attention? Im not quite sure I understand where and how to fix the problem... thanks

Guest mongeonman
Posted

you have to take out the door panel to fix those switches,then take out the door handle latch rod set,at the end of that rod set you will see a electrical gadget(switch)with 2 wires,test this one to see if its good.now that the latch rod is out,look at the outside handle(the section that is inside the door,again their will be another gadget with 2 wires that moves wen you pull the handle,thats the one you have to test this one to.you should do that on both doors i think(thats what i did and everyting started to work again).d ont forget to check all the connections.good luck,iknow its a hell of a job but it is worth it to see the fireworks and the reatta inscription.

Guest grkman1
Posted

Thanks ever so much....Now I am curious to see what you mean about "fireworks" Ill have to do this as soon as I have some time.

Again, thank you

George

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...