Restorer32 Posted October 17, 2006 Posted October 17, 2006 Looking for 2 wheel cylinders with linkages and a master cylinder for a 1926 Kissel 655. I an told that the brake system is the same as used on some Mid '20's Chryslers. These are Lockheed externally contracting brakes. Any leads appreciated. Any rebuildable condition accepted. Help put this Kissel Brougham on the show field at Hershey next year.
K8096 Posted October 17, 2006 Posted October 17, 2006 Is the car you're working on a low mileage original that came out of Cleveland?
Restorer32 Posted October 17, 2006 Author Posted October 17, 2006 It was recently purchased off E-Bay. I believe it came from Texas? Very solid original only missing the above mentioned brake parts. It's being treated to a complete frame up restoration. We previously restored a Gold Bug so we're not new to the mysteries of Kissel. This one, being a 655, is, of course, recognized as a full Classic by the CCCA.
KRK Sr. Posted October 17, 2006 Posted October 17, 2006 Restorer32, Do you need front or rear w/cyls? there is a difference, I may have them. I also have some extra linkage arms that go into the w/cyls. they use what I call short and long arms.I know I have short, will have to check on extra long. I can not help with the Master Cyl. Karl
Guest imported_Jaybird29 Posted October 21, 2006 Posted October 21, 2006 Give me a call at 610-863-6955 If it's break parts from 24 to 30 Chrysler ,I have it !!both internal and external !! I'm above Allentown !! Thisa is something you would want to match !! Not all models are the same for Chrysler !!Jay astheime@ptd.net
jquam Posted October 21, 2006 Posted October 21, 2006 Restorer32I see from your post you are familiar with Kissel's. I am currently restoring a 1914 Kissel semi-racer and am in need of the chain drive generator...I have the chain and a picture of the generator, however it is missing from the car. Would you happen to know where I might get one??Thanks,John Quamq2jazz@sbcglobal.net
Restorer32 Posted October 23, 2006 Author Posted October 23, 2006 Can't help with the '14 generator though I see there is a '13? starter on e-bay. I am attaching pics of the Kissel brake cylinders we need. Hopefully they are the same as Chrysler Lockheed. Need 1 front and 1 rear, cylinders and arms. Also need a master cylinder.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now