1930 Chrysler 70 Roadster Brakes-

[jquam]

I had a problem with the left rear brake not releasing when the brake pedal was released and the right rear releasing slowly. I pulled the rear hubs and everything looked okay, however, the only way the LR brake would release was to open the bleeder.

All the hoses have been replaced...In going over the rear system I found a kink in right rigid brake line, so I replaced both R&L rigid lines. The rear brakes now seem to operate properly, however, I now have very little brake pedal (approx 1-2"off floor). I bled the system and don't seem to get any more air, however, the brake pedal is about half of what is was before I replaced the lines.

Any ideas???