Guest howardmoss Posted March 19, 2006 Share Posted March 19, 2006 My 1990 Reatta is giving me an electrical problem detection. The lights on the panel goes dark. Is there a way I can check for codes, like I can on my 1989 Reatta??Thanks for any input. Link to comment Share on other sites More sharing options...
Guest F14CRAZY Posted March 19, 2006 Share Posted March 19, 2006 Yes sir. Press "OFF" and "WARMER" as you usually would. Codes and interface are through the odometer . No ECC here. Might want to download the manual because I can't remember what buttons do what, but off and warmer are good enough to pull a code Link to comment Share on other sites More sharing options...
Jim Posted March 19, 2006 Share Posted March 19, 2006 Pressing and holding the OFF and temp UP button will put you into the diagnostic mode. The codes will read out digitally in the area where the odometer is normally. You can scroll through the EC, BC etc codes by using the fan up and down switch. Yes up No down. When you are done you can either turn off the key or press the first button to the right of the fan switch.If your IPC is going black and you are getting an electrical problem detected you have a bad IPC. This is the most common part to go bad in the '90 and newer Reattas. You will need to replace it. I have some good ones and can be reached at jfinn@cpinternet.com Link to comment Share on other sites More sharing options...
Guest howardmoss Posted March 19, 2006 Share Posted March 19, 2006 Thanks for the info. I'll get back next day or so. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now